Hostname: page-component-5c6d5d7d68-thh2z Total loading time: 0 Render date: 2024-08-15T21:04:25.043Z Has data issue: false hasContentIssue false
  • English
  • Français

Plasma Parameter and Film Quality in the ECR-Plasma-CVD

Published online by Cambridge University Press:  21 February 2011

Y. Nakayama ,
M. Kondoh ,
K. Hitsuishi  and
T. Kawamura
Y. Nakayama
Affiliation:
Electrical Engineering, College of Engineering, University of Osaka Prefecture, Mozu-Umemachi, Sakai, Osaka 591, Japan
M. Kondoh
Affiliation:
Electrical Engineering, College of Engineering, University of Osaka Prefecture, Mozu-Umemachi, Sakai, Osaka 591, Japan
K. Hitsuishi
Affiliation:
Electrical Engineering, College of Engineering, University of Osaka Prefecture, Mozu-Umemachi, Sakai, Osaka 591, Japan
T. Kawamura
Affiliation:
Electrical Engineering, College of Engineering, University of Osaka Prefecture, Mozu-Umemachi, Sakai, Osaka 591, Japan
Get access

Abstract

New DC bias method for the electron cyclotron resonance (ECR) plasma chemical vapor deposition (CVD) is demonstrated, where the highly photosensitive a-Si:H film of the device grade is deposited on the dielectric substrate. The measurement of plasma parameters using a probe technique indicates that the impinging of ion H+ on the growing surface is the key to the high quality a-Si:H film and this DC bias method controls the film properties by the ion density rather than the ion energy.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 190: Symposium M – Plasma Processing and Synthesis of Materials III , 1990 , 261
Copyright
Copyright © Materials Research Society 1991

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1) Herak, T. V., Chau, T. T., Mejia, S. R., Shufflebotham, P. K., Schellenberg, J. J., Card, H. C., Kao, K. C. and McLeod, R. D., J. Non-Cryst. Solids 97/98, 277 (1987).Google Scholar
2) Akiyama, K., Tanaka, E., Takimoto, A. and Watanabe, M., Jpn. J. Appl. Phys. 27, 2192 (1988).Google Scholar
3) Murai, H., Kobayashi, K., Hayama, M. and Kurokawa, H., Proceedings of the 6th Symposium on Plasma Processing, edited by Kato, I. and Itatani, R. (Research Group of Plasma Electronics, The Japan Society of Applied Physics, Kyoto, 1989), p. 315.Google Scholar
4) Nakayama, Y., Kondoh, M., Hitsuishi, K. and Kawamura, T., submitted to Appl. Phys. Lett.Google Scholar