Hostname: page-component-848d4c4894-cjp7w Total loading time: 0 Render date: 2024-06-23T21:21:43.442Z Has data issue: false hasContentIssue false
  • English
  • Français

Physical and Electrochemical Properties of SiOx /C Composites Prepared by a Combination of Spray Pyrolysis and High Energy Ball Milling

Published online by Cambridge University Press:  04 August 2015

Anara Molkenova  and
Izumi Taniguchi
Anara Molkenova
Affiliation:
Department of Chemical Engineering, Tokyo Institute of Technology, 2-12-1 Ookayama, Meguro-ku, Tokyo 152-8550, Japan
Izumi Taniguchi
Affiliation:
Department of Chemical Engineering, Tokyo Institute of Technology, 2-12-1 Ookayama, Meguro-ku, Tokyo 152-8550, Japan
Get access

Abstract

Spray pyrolysis has been widely used to prepare homogeneous and uniform ceramic powders with high purity. In this study, we are proposing ultrasonic spray pyrolysis followed by heat treatment to produce SiOx/C composite powders, where sucrose was used as a carbon source. Furthermore, high energy ball milling of the as-prepared powders in the presence of acetylene black was conducted to activate its electrochemical properties by reducing the particle size and improving the functionalization of the SiOx composite particles. SiOx/C nanocomposite finally obtained at a sucrous concentration of 0.1 mol L-1 showed superior electrochemical properties, and the SiOx/C nanocomposite electrode delivered the first discharge and charge capacities of 1252 and 819 mAh g-1, respectively, with an initial columbic efficiency of 65% at a current density of 50 mAh g-1 in the potential range from 0.01 to 3 V versus Li/Li+.

Keywords

energy storagespray pyrolysispowder processing
Type
Articles
Information
MRS Online Proceedings Library (OPL) , Volume 1775: Symposium I – High Capacity Anode Materials for Lithium Ion Batteries , 2015 , pp. 7 - 12
Copyright
Copyright © Materials Research Society 2015 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

Poizot, Ph., Dolhemb, F., Energy Environ. Sci. 4, 2003 (2011).CrossRefGoogle Scholar
Mahmood, N., Hou, Y., Adv. Sci. 1, 1400012 (2014).CrossRefGoogle Scholar
Yan, N., Wang, F., Zhong, H., Lim, Y. Wang, Y., Hu, L., Chen, Q., Sci. Rep. 3, 1568 (2013).CrossRefGoogle Scholar
Chang, W.-S., Park, C.-M, Kim, J-H., Kim, Y.-U., Jeong, G., Sohn, H.-J., Enengy Environ. Sci., 5, 6895 (2012).CrossRefGoogle Scholar
Wang, J., Zhao, H., Hea, J., Wang, Ch., Wang, J., J. Power Sources 196, 4811 (2011).CrossRefGoogle Scholar
Guo, H., Mao, R., Yang, X., Chen, J., Electrochim. Acta 74, 271 (2012).CrossRefGoogle Scholar
Gong, H., Li, N., Qian, Y., Int. J. Electrochem. Sci. 8, 9811 (2013).Google Scholar
Molkenova, A. and Taniguchi, I., Adv. Powder Technol. 26, (2015) (in press).Google Scholar
Taniguchi, I., Lim, C. K., Song, D. and Wakihara, M., Solid State Ionics 146,239(2002).CrossRefGoogle Scholar
Shao, B., Taniguchi, I., J. Power Sources 199, 278 (2012).CrossRefGoogle Scholar