Hostname: page-component-8448b6f56d-cfpbc Total loading time: 0 Render date: 2024-04-20T00:14:02.389Z Has data issue: false hasContentIssue false
  • English
  • Français

Passivation Behavior of Mild Steel Used for Nuclear:Waste Disposal Package

Published online by Cambridge University Press:  10 February 2011

Yuichi Fukaya  and
Masatsune Akashi
Yuichi Fukaya
Affiliation:
Research Institute, Ishikawajima-Harima Heavy Industries, Co., Ltd. 3–1–15 Toyosu, Koto-ku, Tokyo, 135–8732 JAPAN
Masatsune Akashi
Affiliation:
Research Institute, Ishikawajima-Harima Heavy Industries, Co., Ltd. 3–1–15 Toyosu, Koto-ku, Tokyo, 135–8732 JAPAN
Get access

Abstract

Mild steel has been investigated as one of the overpack materials for geological disposal of high-level nuclear waste. The present paper discussed the passivation behavior of mild steel using an electrochemical approach to evaluate the critical condition for passivation. The critical current density for passivation, icris, of mild steel in 0.1 mol /L [HCO3 + CO32−] solution at room temperature was found to decrease with increasing pH of the solution. The depassivation pH, pHd, at room temperature was determined to be about 7.5 by comparisons between icris and the diffusion-limiting current density, iL02, for dissolved oxygen of 8.1 ppm in equilibrium with atmospheric oxygen. The anodic current density of mild steel in the solution of pH = 8 at 90°C was also measured and was found to decrease rapidly with time, leading to the absence of a critical current density for passivation. Thus, mild steel can be self-passivated in the system. An empirically determined corrosion phase diagram is provided for mild steel in 0.1 mol/L [HCO3− + CO32−] solution at 90°C, based on these findings and some published data.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 556: Symposium QQ – Scientific Basis for Nuclear Waste Management XXII , 1999 , 871
Copyright
Copyright © Materials Research Society 1999

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Power Reactor & Nuclear Fuel Development Corporation, PNC TN 1410 92-081, p. 4–59 (1992).Google Scholar
2. Marsh, G. P., Bland, I. D., Desport, J. A., Naish, C., Westcott, C., and Taylor, K. J., Europe. Appl. Res. Rep. -Nucl. Sci. Technol., 5 [2], 223 (1983).Google Scholar
3. Fukuda, T. and Akashi, M., in Scientific Basis for Nuclear Waste Management XIX, edited by Murphy, W. M. and Knecht, D. A. (Mater. Res. Soc. Proc. 412, Boston, MA, 1995) pp. 597–602.Google Scholar
4. JIS G 0577 “Method of Pitting Potential Measurement for Stainless Steels” (1981).Google Scholar
5. Akashi, M., BOSHOKU GIJUTSU, 32, 239 (1980).Google Scholar
6. Fukaya, Y. and Akashi, M., Proc. 44th Japan Conference on Materials and Environments, p. 443 (1997).Google Scholar
7. Tsuru, T., Zaitsu, T., Masamura, K. and Haruyama, S., MTERE2 (JIM), 42, p. 197 (1978).Google Scholar
8. Fukaya, Y. and Akashi, M., (unpublished).Google Scholar
9. Noda, K., Hirota, Y. and Seo, M., Proc. JSCE Corrosion ‘94, p. 223 (1994).Google Scholar
10. Nakayama, G. and Akashi, M., in Scientific Basis for Nuclear Waste Management XIV, edited by Abrajano, Jr. and Johnson, L. H. (Mater. Res. Soc. Proc. 212, Boston, MA, 1990) pp. 279–286.Google Scholar
11. Akashi, M., Nakayama, G. and Fukuda, T., CORROSION/98, NACE, Paper No. 158(1998).Google Scholar