Hostname: page-component-8448b6f56d-cfpbc Total loading time: 0 Render date: 2024-04-24T20:23:12.114Z Has data issue: false hasContentIssue false
  • English
  • Français

Oxide Charging Effects by PH3/He Ion Shower Doping

Published online by Cambridge University Press:  14 March 2011

Cheon-Hong Kim ,
Juhn-Suk Yoo ,
Kee-Chan Park  and
Min-Koo Han
Cheon-Hong Kim
Affiliation:
School of Electrical Engineering, Seoul National University, San 56-1 Shinlim-dong, Kwanak-gu, Seoul 151-742, Korea
Juhn-Suk Yoo
Affiliation:
School of Electrical Engineering, Seoul National University, San 56-1 Shinlim-dong, Kwanak-gu, Seoul 151-742, Korea
Kee-Chan Park
Affiliation:
School of Electrical Engineering, Seoul National University, San 56-1 Shinlim-dong, Kwanak-gu, Seoul 151-742, Korea
Min-Koo Han
Affiliation:
School of Electrical Engineering, Seoul National University, San 56-1 Shinlim-dong, Kwanak-gu, Seoul 151-742, Korea
Get access

Abstract

We report the oxide charging effects on metal oxide semiconductor (MOS) structure caused by PH3/He ion shower doping. The parallel negative shift of flat-band voltage occurred for the ion-doped PETEOS samples even after thermal annealing. When the ion dose was higher, this shift was larger. These results show that a considerable amount of positive charges were induced inside the oxide films after PH3/He ion shower doping process. For the same ion dose, the flat-band voltage shift is larger when the thickness of PETEOS is thicker. When the ion dose was 1.5×1017cm−2 and the thickness of PETEOS was 80nm, the shift of flat-band voltage was larger than −7V. We can conclude that PH3/He ion shower doping process induces the positive charges, which result in the flat band voltage shift of MOS capacitors, in the bulk oxide films when oxide films are exposed to ion shower doping.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 621: Symposia Q/R – Electron-Emissive Materials, Vacuum Microelectronics… , 2000 , Q9.12.1
Copyright
Copyright © Materials Research Society 2000

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Hack, M., Mei, P., Lujan, R. and Lewis, A. G., JNCS 164–166, 727–730 (1993).Google Scholar
2. Jun, J. M., Yoo, S. S., Lee, K. H., Kang, H. K., Kim, K. N. and Jang, J., Journal of the Korean Physical Society, 27, S95–S98, (1993).Google Scholar
3. Mimura, A., Kawachi, G., Aoyama, T., Suzuki, T., Nagae, Y., Konishi, N. and Mochizuki, Y., IEEE Trans. Electron Device, 40, 513–520 (1993).Google Scholar
4. McVittie, J. P., IEDM Tech. Dig., 433–436 (1997).Google Scholar
5. Lee, K. Y., Fang, Y. K., Chen, C. W., Huang, K. C., Liang, M. S. and Wuu, S. G., IEEE Electron Device Lett., 18, 187–189 (1997).Google Scholar
6. Yeh, C. F., Yang, T. Z. and Chen, T. J., IEEE Trans. Electron Device, 42, 307–314 (1995).Google Scholar
7. Takase, M., Eriguchi, K. and Mizuno, B., Jpn. J. Appl. Phys., 36, 1618–1621 (1997).Google Scholar