Hostname: page-component-8448b6f56d-dnltx Total loading time: 0 Render date: 2024-04-24T23:57:46.582Z Has data issue: false hasContentIssue false
  • English
  • Français

A Non-Linear Behavior Model for SiC/SiC Composites

Published online by Cambridge University Press:  15 February 2011

J.J. Kibler ,
M.L. Jones  and
C.F. Yen
J.J. Kibler
Affiliation:
Materials Sciences Corporation 500 Office Center Drive, Suite 250 Fort Washington, PA 19034
M.L. Jones
Affiliation:
Materials Sciences Corporation 500 Office Center Drive, Suite 250 Fort Washington, PA 19034
C.F. Yen
Affiliation:
Materials Sciences Corporation 500 Office Center Drive, Suite 250 Fort Washington, PA 19034
Get access

Abstract

An interactive analytical model has been developed for modeling the behavior of Continuous Fiber reinforced Ceramic matrix Composites (CFCC). The model integrates a large number of micromechanics solutions to problems associated with the microstructure of CFCC materials into an easy to use tool for predicting properties, strengths, and stress states for these materials in unidirectional and laminated forms. Particulate reinforcement and voids can be included in the material description. Inherent in the code is a model for handling the accumulation of micro cracks within the matrix as loading is increased, resulting in a nonlinear stress-strain response of the composite. Sufficient material characteristics are retained within the model to enable sensitivity studies to identify principal causes for material behavior.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 365: Symposium M – Ceramic Matrix Composites–Advanced High-Temperature Structural Materials , 1994 , 171
Copyright
Copyright © Materials Research Society 1995

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Hashin, Z., “Thermoelastic Properties of Fiber Reinforced Composites with Imperfect Interfaces,” Mechanics of Composite Materials, 1990, Vol. 8, pp.333–348.Google Scholar
2. Tsai, S. W., and Wu, E. M., “A General Theory of Strength for Anisotropic Materials,” Journal of Composite Materials, Jan. 1971, Vol 5, pp.58–80.Google Scholar
3. Hashin, Z., “Failure Criteria for Unidirectional Fiber Composites,” Journal of Applied Mechanics, June 1980, Vol.47, pp.329–334.Google Scholar
4. Rosen, B. W., “Mechanics of Composite Strengthening, in Fiber Composite Materials, Am. Soc. for Metals, Metals Park, Ohio, 1965.Google Scholar
5. Sullivan, B.J. and Hashin, Z., “Determination of Mechanical Properties of Interfacial Region between Fiber and Matrix in Organic Matrix Composites,” 3rd Int. Conf. on Composite Interfaces, Case Western Reserve, Univ. of CLeveland, OH, May 1990.Google Scholar
6. Yen, C.F., Buesking, K.W., “Material Modeling for Unidirectional Glass and Glass-Ceramic Matrix Composites with Progressive Matrix Damage, ASTM 4th Symposium on Composite Materials, Fatigue and Fracture, May 1991, ASTM STP 1156.Google Scholar