Hostname: page-component-8448b6f56d-tj2md Total loading time: 0 Render date: 2024-04-24T12:39:49.536Z Has data issue: false hasContentIssue false
  • English
  • Français

Nanocrystalline and Hard, Boron-Alloyed Be Coatings

Published online by Cambridge University Press:  10 February 2011

A. Jankowski ,
P. Ramsey ,
M. McKernan  and
J. Morse
A. Jankowski
Affiliation:
Lawrence Livermore National Laboratory, 7000 East Avenue, Livermore, CA 94550
P. Ramsey
Affiliation:
Lawrence Livermore National Laboratory, 7000 East Avenue, Livermore, CA 94550
M. McKernan
Affiliation:
Lawrence Livermore National Laboratory, 7000 East Avenue, Livermore, CA 94550
J. Morse
Affiliation:
Lawrence Livermore National Laboratory, 7000 East Avenue, Livermore, CA 94550
Get access

Abstract

Boron-alloy coatings can be formed by sputtering compound targets, through co-deposition with other elemental targets, by utilizing reactive gas mixtures, and/or by post-deposition implantation. Specific to this study, boron-alloy coatings are assessed with respect to composition as deposited by co-sputtering boron and beryllium. Transmission electron microscope (TEM), bright-field images with selected area diffraction are used to reveal the microstructure and phase. Refinement in grain size to the nanoscale occurs through boron addition as well as transition metal impurities. An increase in coating hardness with boron addition is measured using nanoindentation. Scanning electron microscope (SEM), secondary electron images reveal the surface morphology variations for thick coatings that occur with boron addition as measured using energy dispersive spectrometry (EDS). The phase formed in boron-alloyed beryllium coating is found to be dependent on both coating composition and the sputter deposition conditions. It is concluded that the geometry of the deposition sources with the configuration of the substrate effect the coating composition, microstructure, and properties

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 593: Symposium U – Amorphous & Nanostructured Carbon , 1999 , 479
Copyright
Copyright © Materials Research Society 2000

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Jankowski, A., Hayes, J., McKernan, M. and Makowiecki, D., Thin Solid Films 308–9, p. 94 (1997).Google Scholar
2. Jankowski, A. and Hayes, J.P., Diamond Relat. Mater. 7, p. 380 (1997).Google Scholar
3. Jiménez, I., Jankowski, A., Terminello, L., Carlisle, J., Sutherland, D., Doll, G., Mantese, J., Tong, W., Shuh, D. and Himpsel, F., Appl. Phys. Lett. 68, p. 2,816 (1996).Google Scholar
4. Jiménez, I., Jankowski, A., Terminello, L., Sutherland, D., Carlisle, J., Doll, G., Tong, W., Shuh, D., and Himpsel, F., Phys. Rev. B 55, p. 12,025 (1997).Google Scholar
5. Jankowski, A., Felter, T., Patterson, R., Hayes, J., Anders, S., Stamler, T. and Poker, D., in Properties and Processing of Vapor-Deposited Coatings, edited by Pickering, M., Sheldon, B.W., Lee, W.Y. and Johnson, R.N. (Mater. Res. Soc. Proc. 555, Pittsburgh, PA, 1999), p. 371–376.Google Scholar
6. Adams, R. and Nordin, C., Thin Solid Films 181, p. 375 (1989).Google Scholar
7. Tanner, L., and Ray, R., Acta Metall. 27, p. 1727 (1979).Google Scholar
8. Tanner, L., Scripta Metall. 145, p. 657 (1980).Google Scholar
9. Severin, C., Chen, C., Belova, A., and Lin, M., J. Appl. Phys. 52, p. 1850 (1981).Google Scholar
10. Makowiecki, D. and McKernan, M., Fabrication of Boron Sputter Targets, U.S. Patent No. 5,392,981 (February 28, 1995).Google Scholar
11. Doerner, M. and Nix, W., J. Mater. Res. 1, p. 601 (1986).Google Scholar
12. McKay, J. and Hill, M., J. Nucl. Mater. 8, p. 263 (1963).Google Scholar
13. Haan, S., Phys. Plasmas 2, p. 2480 (1995).Google Scholar