Hostname: page-component-848d4c4894-8bljj Total loading time: 0 Render date: 2024-06-28T15:59:05.794Z Has data issue: false hasContentIssue false
  • English
  • Français

Monotonic and Transient Creep Experiments for Single Phase Gamma TiAl at Intermediate Temperatures

Published online by Cambridge University Press:  15 February 2011

Min Lu  and
K. J. Hemker
Min Lu
Affiliation:
Department of Mechanical Engineering, The Johns Hopkins University, Baltimore, MD 21218
K. J. Hemker
Affiliation:
Department of Mechanical Engineering, The Johns Hopkins University, Baltimore, MD 21218
Get access

Abstract

Monotonie creep experiments (constant stress and constant temperature) of a single phase γ Ti47Al51Mn2 were conducted within a temperature region where the yield stress anomaly is observed (500°C - 600°C). The creep strength was found to have a normal temperature dependence. In addition to the monotonie creep experiments, temperature change experiments were performed. The creep activation energy obtained by the transient experiments was found to be significantly lower than that obtained from the monotonie experiments. TEM observations indicate that the microstructure evolves throughout creep, and no evidence of the formation of subgrains was observed. Instead, the mobility and the multiplication of ordinary dislocations were found to play a dominant role in intermediate temperature creep of single phase γ TiAl.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 460: Symposium Z – High-Temperature Ordered Intermetallic Alloys VII , 1996 , 269
Copyright
Copyright © Materials Research Society 1997

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Martin, P. L., Mendiratta, M. G. and Lipsitt, H. A., Met. Trans. A, 14, p. 2170, 1983.Google Scholar
2. Wheeler, D. A., London, B. and Larsen, D. E. Jr, Scripta metall. et mater., 26, p. 939, 1992.Google Scholar
3. Viswanathan, G. B. and Vasudevan, V. K., in High-Temperature Ordered Intermetallic Alloys V, edited by Baker, I., Daviola, R., Whittenberger, J. D. and Yoo, M. H., (Mater. Res. Soc. Proc. 288, Pittsburgh, PA 1993), p. 1155, 1993.Google Scholar
4. Bartels, A., Seeger, J. and Mecking, H., in High-Temperature Ordered Intermetallic Alloys V. edited by Baker, I., Daviola, R., Whittenberger, J. D. and Yoo, M. H., (Mater. Res. Soc. Proc. 288, Pittsburgh, PA 1993), p. 1179, 1993.Google Scholar
5. Takahashi, T., Nagai, H. and Oikawa, H., Mat. Sci. and Eng. A, 114, p. 13, 1989.Google Scholar
6. Takahashi, T., Nagai, H. and Oikawa, H., Mater. Trans., JIM, 30, p. 1044, 1989.Google Scholar
7. Hayes, R. W. and Martin, P. L., Acta metall. et mater., 43, p. 2761, 1995.Google Scholar
8. Takahashi, T. and Oikawa, H., Mater. Res. Soc. Symp. Proc, 133, p. 699, 1989.Google Scholar
9. Mehrer, H., Sprengel, W. and Denkinger, M., Diffusion in Ordered Alloys. TMS, p. 51, 1993.Google Scholar
10. Viguier, B., Hemker, K. J., Bonneville, J., Louchet, F., and Martin, J-L., Phil. Mag. A, 71, p. 1295, 1995.Google Scholar
11. Lu, Min and Hemker, K. J., Acta materialia, submitted, 1996.Google Scholar
12. Maruyama, K., Takahashi, T. and Oikawa, H., Mat. Sci. and Eng. A, 153, p. 433, 1992.Google Scholar
13. Evans, R. W. and Wilshire, B., Creep of Metals and Alloys, The Institute of Metals, London, 1985, chapter 6.Google Scholar
14. Viguier, B. and Hemker, K. J., Phil. Mag. A, 73, p. 575, 1996.Google Scholar
15. Wardle, S., Phan, I. and Hug, G., Phil. Mag. A, 68, p. 471, 1993.Google Scholar