Hostname: page-component-7c8c6479df-r7xzm Total loading time: 0 Render date: 2024-03-28T16:40:06.479Z Has data issue: false hasContentIssue false

Modeling of Boron Diffusion in Polysilicon-On-Silicon Layers

Published online by Cambridge University Press:  28 February 2011

Akif Sultan
Affiliation:
Microelectronics Research Center, University of Texas, Austin, TX 78712
Shubneesh Batra
Affiliation:
Microelectronics Research Center, University of Texas, Austin, TX 78712
Melvyn Lobo
Affiliation:
Microelectronics Research Center, University of Texas, Austin, TX 78712
Keunhyung Park
Affiliation:
Microelectronics Research Center, University of Texas, Austin, TX 78712
Sanjay Banerjee
Affiliation:
Microelectronics Research Center, University of Texas, Austin, TX 78712
Get access

Abstract

In the present study we have modeled the diffusion of boron in single crystal silicon from an ion-implanted polysilicon film deposited on a single crystal silicon substrate. Modeling has been done for both BF2 and boron implants in the polysilicon layer. A new phenomenological model for a diffusivity has been implemented in the PEPPER simulation program using an effective concentration-dependent diffusivity approach. The effective diffusivities of boron in single crystal silicon have been extracted using Boltzmann-Matano analysis. The modeling has been implemented for a wide range of furnace anneal conditions (800°C to 950°C, from 30 min. to 6 hours), and implant conditions (BF2 doses varied from 5×1015 to 2×10'16 cm-2 at 70 keV, boron dose of 5×1015 cm-2 at 20 keV).

Type
Research Article
Copyright
Copyright © Materials Research Society 1993

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Patton, G. L., Bravman, J. C., and Plummer, J. D., IEEE Trans. Electron Devices ED–33, p. 1754 (1986).Google Scholar
2. Hansen, S. E., SUPREM III Users Manual, Stanford University (1986).Google Scholar
3. Ho, C.P., Plummer, J. D., Hansen, S.E., and Dutton, R. W., IEEE Trans, on Electron Devices, Vol. ED–30, No. 11, p. 1438 (1983).Google Scholar
4. Mulvaney, B. J., Richardson, W. B., and Crandle, T., PEPPER 1.2 Users Manual, Microelectronics & Computer Technology Corporation, Austin (1989).Google Scholar
5. Shewmon, P. G., Diffusion in Solids, McGraw-Hill Book Company (1963).Google Scholar
6. Schaber, H., Criegern, R. V., and Weitzel, I., J. Appl. Phys., Vol. 58, No. 11, p. 4036 (1985).Google Scholar
7. Suzuki, K., Fukano, T., and Kataoka, Y., J. Electrochem. Soc., Vol. 138, No. 7, p. 2201 (1991).Google Scholar
8. Park, K., Batra, S., Banerjee, S., Lux, G., and Manukonda, R., J. Electrochem. Soc., Vol. 138, No. 2, p 545 (1991).Google Scholar
9. Mulvaney, B. J., Richardson, W. B., and Crandle, T., IEEE Trans, on Computer-Aided Design, Vol. 8, No. 4 (1989).Google Scholar