Hostname: page-component-8448b6f56d-dnltx Total loading time: 0 Render date: 2024-04-25T06:00:49.068Z Has data issue: false hasContentIssue false
  • English
  • Français

The Microstructure of Wood Fiber Reinforced Cementitious Composites

Published online by Cambridge University Press:  21 February 2011

X. Lin ,
M.R. Silsbee  and
D.M. Roy
X. Lin
Affiliation:
The Pennsylvania State University, Intercollege Materials Research Laboratory, University Park, PA 16802
M.R. Silsbee
Affiliation:
The Pennsylvania State University, Intercollege Materials Research Laboratory, University Park, PA 16802
D.M. Roy
Affiliation:
The Pennsylvania State University, Intercollege Materials Research Laboratory, University Park, PA 16802
Get access

Abstract

Wood fiber reinforcing of cement matrices is an economic and an efficient approach to producing high performance cementitious composites. In this study, wood fiber reinforced cementitious composites (WFRCs) were made by using both conventional and novel processing styles. Wood fibers exhibited a considerable ability to improve the flexural strength and the toughness of WFRC when an adequate content of the fibers was used. The morphologies ofvarious type of wood fibers and fracture surface of WFRC were examined by scanning electron microscope (SEM) and an environmental scanning electron microscope (ESEM). The microstructures of wood fiber and WFRC were correlated with their mechanical properties. Results indicate a significant interfacial bonding between the cement matrix and the wood fibers.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 370: Symposia Va/Vb – Microstructure of Cement-Based Systems/Bonding and Interfaces in Cement... , 1994 , 487
Copyright
Copyright © Materials Research Society 1995

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Bentur, A. and Mindess, S., Fiber Reinforced Cementitious Composite, (Elsevier Science Publishers, New York, 1990) p.9.Google Scholar
2. Swamy, R. N., Natural Fiber Reinforced Cement and Concrete, (Blackie and Son, London, 1988), p. v–vi.Google Scholar
3. Chen, Y., Park, C. K., Silsbee, M. R., and Roy, D. M. in Advanced Cementitious Systems: Mechanisms and Properties, edited by F.P.Glasser, McCarthy, G.J., Young, J.F., Mason, T.O. and Pratt, P.L. (Mater. Res. Soc. Proc. 245, Pittsburgh, PA, 1992) pp. 229–234.Google Scholar
4. Sarja, A., in Natural Fiber Reinforced Cement and Concrete, edited by Swamy, R. N. (Elackie and Son, London 1988), pp.63–91; Concrete International, 11(7), 45-49(1989).Google Scholar
5. R. Coutts, S. P., in Natural Fiber Reinforced Cement and Concrete, edited by Swamy, R. N. (Elackie and Son, London 1988), pp.1–62; J. Mater. Sci. Lett. 6, 955 (1987).Google Scholar
6. Lee, A. W. C. and Short, P. H., Forest Prod. J. 39(10), 68(1989).Google Scholar
7. Lin, X., Silsbee, M.R., Kessler, K., Blankenhorn, P.R., and Roy, D.M., Cement and Concrete Research 24(8), 1558 (1994).Google Scholar
8. Kessler, K. (private communication).Google Scholar
9. Michell, A. J. and Freischmidt, G., J. Mat. Sci. 25, 5225 (1990).Google Scholar
10. Coutts, R. S. P. and Kightly, P., J. Mat. Sci. 19, 3355 (1984).Google Scholar
11. Lin, X., Silsbee, M.R. and Roy, D.M., presented at 96th Annual Meeting of American Ceramic Society, Indianapolis, 1994.Google Scholar
12. Lin, X., Silsbee, M.R., Kessler, K., Blankenhorn, P.R., and Roy, D.M., “Wood Fiber Reinforced Cementitious Composites and Chemical Pretreatments of Wood Fibers” - to be published.Google Scholar
13. Titchell, I., J. Mat. Sci. 26, 1199 (1991).Google Scholar
14. Silsbee, M. R., Roy, D. M. and Adair, J. H., in Specialty Cements with Advanced Properties, edited by Sheetz, B. E. et al. (Mater. Res. Soc. Proc. 179, Pittsburgh, PA 1991) pp. 129–144.Google Scholar
15. Roy, D. M., Science, 235, 651 (1987).Google Scholar