Hostname: page-component-848d4c4894-4rdrl Total loading time: 0 Render date: 2024-07-01T14:01:20.885Z Has data issue: false hasContentIssue false
  • English
  • Français

Mechanical Properties of Feedstock Material for Fused Deposition of Ceramics

Published online by Cambridge University Press:  10 February 2011

N. Venkataraman ,
T. McNulty ,
S. Rangarajan ,
M. Vidaic ,
M. J. Matthewson ,
N. Langrana ,
A. Safari  and
S. C. Danforth
N. Venkataraman
Affiliation:
Rutgers University, Department of Ceramic and Materials Engineering, Piscataway, NJ
T. McNulty
Affiliation:
Rutgers University, Department of Ceramic and Materials Engineering, Piscataway, NJ
S. Rangarajan
Affiliation:
Rutgers University, Department of Ceramic and Materials Engineering, Piscataway, NJ
M. Vidaic
Affiliation:
Rutgers University, Department of Ceramic and Materials Engineering, Piscataway, NJ
M. J. Matthewson
Affiliation:
Rutgers University, Department of Ceramic and Materials Engineering, Piscataway, NJ
N. Langrana
Affiliation:
Rutgers University, Department of Ceramic and Materials Engineering, Piscataway, NJ
A. Safari
Affiliation:
Rutgers University, Department of Ceramic and Materials Engineering, Piscataway, NJ
S. C. Danforth
Affiliation:
Rutgers University, Department of Ceramic and Materials Engineering, Piscataway, NJ
Get access

Abstract

A scientific methodology to characterize the critical mechanical properties of feedstock material for fused deposition of ceramics has been developed. A detailed discussion of the methodology of mechanical characterization and results for lead zirconate titanate (PZT) fused deposition of ceramics (FDC) feedstock is presented. The effect of storage time, temperature and crosshead displacement rates on the mechanical properties of the PZT FDC feedstock was studied. The modulus and the failure stress increase with displacement rate. The modulus and failure stress decrease with temperature indicating the necessity for cooling filaments prior to entrance to liquefier. The modulus also decreases with storage time in 50% RH while failure strain increases with storage time in 50% RH.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 542: Symposium V – Solid Freeform and Additive Fabrication , 1998 , 111
Copyright
Copyright © Materials Research Society 1999

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Agarwala, M.K., Bandyopadhyay, A., Weeren, R. van, Safari, A. and Danforth, S.C., Ceramic Bulletin 75 (11), 60–65 (1996).Google Scholar
2. Bandyopadhyay, A., Panda, R.K., Janas, V.F., Danforth, S.C. and Safari, A., J. Am. Cer. Soc. 80 (6), 1366–1372 (1997).Google Scholar
3. U.S. Patent # 5738817, March 1998.Google Scholar
4. U.S. Patent # 5818149, October 1998.Google Scholar
5. Benbow, J. and Bridgwater, J., Paste Flow and Extrusion, edited by Crookall, J.R., Shaw, M.C. and Suh, N.P. (Clarendon Press, Oxford, UK, 1993).Google Scholar
6. Zheng, J., Carlson, W.B. and Reed, J.S., J. Am. Cer. Soc. 75 (11), 3011–3016 (1992).Google Scholar
7. Beer, F.P. and Johnston, E.R., Mechanics of Materials, 2nd ed. (McGraw-Hill Co., London, 1992), pp. 634–641.Google Scholar
8. McNulty, T., Bandyopadhyay, A., Danforth, S.C. and Safari, A., Journal of Rapid Prototyping 4 (4), 144–150 (1998).Google Scholar
9. .McNulty, T., Shanefield, D.J., Danforth, S.C., and Safari, A., Dispersion of Lead Zirconate Titanate for Fused Deposition of Ceramics, J. Am. Cer. Soc., In Press.Google Scholar
10. Reed, J., Principles of Ceramic Processing, 2nd ed. (John Wiley and Sons Inc., New York, 1994), pp. 247–272.Google Scholar
11. Franks, G.V. and Lange, F.F., J. Am. Cer. Soc. 79 (12), 3161–3168 (1996).Google Scholar
12. Aklonis, J.J. and MacKnight, W.J., Introduction to Polymer Viscoelasticity, 2nd ed. (John Wiley and Sons Inc., New York, 1983).Google Scholar