Hostname: page-component-76fb5796d-qxdb6 Total loading time: 0 Render date: 2024-04-26T06:32:54.987Z Has data issue: false hasContentIssue false
  • English
  • Français

Mechanical Properties and Microarchitecture of Nanoporous Hydroxyapatite Bioceramic Nanoparticle Coatings on Ti and TiN

Published online by Cambridge University Press:  26 February 2011

Andrei Stanishevsky ,
Shafiul Chowdhury ,
Nathaniel Greenstein ,
Helene Yockell-Lelievre  and
Jari Koskinen
Andrei Stanishevsky
Affiliation:
astan@uab.edu, University of Alabama at Birmingham, Physics, 1300 University Blvd, Campbell Hall #310, Birmingham, AL, 35294, United States
Shafiul Chowdhury
Affiliation:
shafiul@uab.edu, University of Alabama at Birmingham, Physics, 1300 University Blvd, Campbell Hall #310, Birmingham, AL, 35294, United States
Nathaniel Greenstein
Affiliation:
nbg@andrew.cmu.edu, University of Alabama at Birmingham, Physics, 1300 University Blvd, Campbell Hall #310, Birmingham, AL, 35294, United States
Helene Yockell-Lelievre
Affiliation:
helene.yockell@chm.ulaval.ca, University Laval, Quebec, G1K 7P4, Canada
Jari Koskinen
Affiliation:
jari.koskinen@vtt.fi, VTT Technical Research Centre of Finland, Espoo, P.O.Box FIN-1000 02044 VTT, Finland
Get access

Abstract

The hydroxyapatite (HA) based bioceramic materials are usually prepared at high sintering temperatures to attain suitable mechanical properties. The sintering process usually results in a material which is compositionally and morphologically different from nonstoichiometric nano-crystalline HA phase of hard tissue. At the same time, HA particulates used as precursors in ceramic manufacturing are often very similar to the natural HA nanocrystals. It has been shown that synthetic nanoparticle HA (nanoHA) based materials improve the biological response in vitro and in vivo, but the information on mechanical properties of these materials is scarce.

In this work we studied the HA nanoparticle (10 – 80 nm mean size) coatings with 30 – 70% porosity prepared by a dip-coating technique on Ti and TiN substrates. It has been found that the mechanical properties of HA nanoparticle coatings are strongly influenced by the initial size, morphology, and surface treatment of nanoparticles. The nanoindentation Young's modulus and hardness of as–deposited nanoHA coatings were in the range of 2.5 – 6.9 GPa and 80 – 230 MPa, respectively. The coatings were stable after annealing up to at least 600 °C, reaching the Young's modulus up to 23 GPa and hardness up to 540 MPa, as well as in simulated body fluids.

Keywords

biomaterialnanoscaleelastic properties
Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 975: Symposium DD – Mechanics of Biological and Bio-Inspired Materials , 2006 , 0975-DD06-15
Copyright
Copyright © Materials Research Society 2007

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Arsenault, A.L., and Grynpas, M.D., Calcif. Tissue Int. 43, 219 (1988).Google Scholar
2. Danilchenko, S.N., Kukharenko, O.G., Moseke, C., Protsenko, I. Yu., Sukhodub, L.F., and Sulkio-Cleff, B., Cryst. Res. Technol. 37, 1234 (2002).Google Scholar
3. Kinney, J.H., Pople, J.A., Marshall, G.W., and Marshall, S J., Calcif. Tissue Int. 69, 31 (2001).Google Scholar
4. Zizak, I., Roschger, P., Paris, O., Misof, B.M., Berzlanovich, A., Bernstor, S.., Amenitsch, H., Klaushofer, K., and Fratzl, P., J. Structural Biology 141, 208 (2003).Google Scholar
5. Liu, D.-M., Yang, Q., and Troczynski, T., Biomat. 23, 691 (2002).Google Scholar
6. Yang, Y.C., Chang, E., and Lee, S.Y., J. Biomed. Mater. Res. A 67, 886 (2003).Google Scholar
7. Ben-Nissan, B., MRS Bull. 29, 28 (2004).Google Scholar
8. Catledge, S.A., Fries, M.D., Vohra, Y.K., Lacefield, W.R., Lemons, J.E., Woodard, S., and Venugopalan, R., J. Nanosci. Nanotechnol. 2, 293 (2002).Google Scholar
9. Suryanarayana, C., and Norton, M.G., X-ray diffraction, a practical approach (Plenum Press, New York 1998) pp.207–222.Google Scholar
10. Hu, Z., Seeley, T., Kossek, S., and Thundat, T., Rev Sci Instrum.75, 400 (2004).Google Scholar
11. Chowdhury, S., Thomas, V., Dean, D., Catledge, S.A., and Vohra, Y.K., J. Nanosci. Nanotechnol. 5, 1816 (2005).Google Scholar
12. Oliver, W.C., and Pharr, G.M., J. Mater. Res. 7, 1564 (1992).Google Scholar
13. Dufresne, E.R., Corwin, E.I., Greenblatt, N.A., Ashmore, J., Wang, D.Y., Dinsmore, A.D., Cheng, J.X., Xie, X.S., Hutchinson, J.W., and Weitz, D.A., Phys. Rev. Lett. 91, 224501-4 (2003).Google Scholar