Hostname: page-component-848d4c4894-pjpqr Total loading time: 0 Render date: 2024-07-04T18:11:12.581Z Has data issue: false hasContentIssue false
  • English
  • Français

Liquid-Liquid Phase Separation of Melts and Glasses in Ferric Ferrous Oxide-Silica System

Published online by Cambridge University Press:  10 February 2011

A. Yasumori ,
A. Koike ,
Y. Kameshima ,
K. Okada ,
T. Yano ,
M. Yamane  and
S. Inoue
A. Yasumori
Affiliation:
Dept. of Inorganic Mater., Tokyo Institute of Technology, Meguro-ku, Tokyo 152, JAPAN
A. Koike
Affiliation:
Dept. of Inorganic Mater., Tokyo Institute of Technology, Meguro-ku, Tokyo 152, JAPAN
Y. Kameshima
Affiliation:
Dept. of Inorganic Mater., Tokyo Institute of Technology, Meguro-ku, Tokyo 152, JAPAN
K. Okada
Affiliation:
Dept. of Inorganic Mater., Tokyo Institute of Technology, Meguro-ku, Tokyo 152, JAPAN
T. Yano
Affiliation:
Dept. of Inorganic Mater., Tokyo Institute of Technology, Meguro-ku, Tokyo 152, JAPAN
M. Yamane
Affiliation:
Dept. of Inorganic Mater., Tokyo Institute of Technology, Meguro-ku, Tokyo 152, JAPAN
S. Inoue
Affiliation:
National Institute for Research in Inorganic Materials, Namiki, Tsukuba 305, JAPAN
Get access

Abstract

The existence of liquid-liquid miscibility gap in ferric ferrous oxide-silica system has been reported, however, the phase separation phenomena and the derived morphology of the phase separated glasses are uncertain. In this study, the melt-quenched samples of 5 Fe3O4-95 SiO2 and 15 Fe3O4-85 SiO2 (mol%) were prepared by melting at 2300°C or 2200°C (expected to be above miscibility gap), and subsequently at 1800°C or 1750°C (in immiscible region) by use of infrared image furnace and quenching at the rate of ≈102 K/sec. The glassy materials exhibited phase separation having discrete spherical particles or interconnected structure due to the composition, melting temperature and time. Also, the segregation of Fe component occurred during melting, which was caused by the difference of specific gravity of components in the melt.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 455: Symposium T – Glasses and Glass Formers–Current Issues , 1996 , 459
Copyright
Copyright © Materials Research Society 1997

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Elmer, T. H., Am. Ceram. Soc. Bull., 57, 1051 (1978)Google Scholar
2. Hirai, S., Morikawa, A., Ishinaga, Y., Okuta, K. and Wada, Y., Bull. Chem. Soc. Jpn, 50, 3411 (1977)Google Scholar
3. Umino, M., Yano, T., Yasumori, A., Shibata, S. and Yamane, M., in Ceramic Transaction vol. 31 edited by Ishizaki, K., Sheppard, L., Okada, S., Hamasaki, T., and Huybrechts, B. (the American Ceramic Society, Ohio, 1993) p. 191;Google Scholar
Yazawa, T. and Tanaka, H., Ceramic Transaction vol. 31 (the American Ceramic Society, Ohio, 1993) p. 213 Google Scholar
4. Taniguchi, H., Fujiwara, T., Yamada, H., Tanosaki, S. and Baba, M., Appl. Phys. Lett., 62, 2155(1993)Google Scholar
5. Takamori, T. and Tomozawa, M., J. Am. Ceram. Soc, 59, 377 (1976)Google Scholar
6. Bowen, N. L. and Schairer, J. F., Am. J. Sci., 5th Ser., 24, 200 (1932)Google Scholar
7. Phillips, B. and Muan, A., J. Am. Ceram. Soc, 42(9), 415 (1959)Google Scholar
8. Osborn, E. F. and Muan, A., revised and redrawn Phase Equillibrium Diagrams of Oxide Systems. Plate 6 (the American Ceramic Society and the Edward Orton Jr, Ceramic Foundation, 1960)Google Scholar
9. Wones, D. R. and Gilbert, M. C., Am. J. Sci., 267 -A, 480 (1969)Google Scholar