Hostname: page-component-848d4c4894-v5vhk Total loading time: 0 Render date: 2024-07-04T20:12:03.117Z Has data issue: false hasContentIssue false
  • English
  • Français

Integranular Fracture: The Effect of Grain Boundary Orientation and Crack Growth Directions

Published online by Cambridge University Press:  10 February 2011

Jeffrey W. Kysar
Jeffrey W. Kysar*
Affiliation:
Division of Engineering, Brown University, Providence, RI 02912
Get access

Abstract

Intergranular fracture is a common failure mechanism for which many issues remain to be resolved. In this study we investigate intergranular fracture behavior of specially oriented symmetric tilt bicrystals of aluminum as well as the fracture behavior of a crack along the interface of a copper-sapphire bicrystal. We begin by describing briefly the structure of a symmetric tilt grain boundary which leads to a discussion of the types of issues related to intergranular fracture that can be addressed with symmetric tilt grain boundaries. We then discuss in detail one of these issues, that of the directional dependence of fracture, and present results of finite element simulations of a copper-sapphire bicrystal specimen that exhibits the directional dependence of fracture. The simulations account for the single crystal nature of the constituents and use a cohesive-zone model, for which the grain boundary energy can be varied, to simulate the fracture process along the interface. The directional dependence of fracture emerges from the simulations for a broad range of parameters in the constitutive models of both the single crystal constituents as well as the interfacial cohesive-zone.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 586: Symposium M – Interfacial Engineering for Optimized Properties II , 1999 , 219
Copyright
Copyright © Materials Research Society 2000

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Anderson, T. L. (1995). Fracture Mechanics: Fundamentals’ and Applications, CRC Press, Inc., Boca Raton.Google Scholar
2. Frost, H. J., Ashby, M. F., and Spaepen, F. (1982). “A catalogue of [100], [110], and [111]symmetric tilt boundaries in face-centered cubic hard sphere crystals.” Harvard University Division of Applied Sciences Materials Research Laboratory Report.Google Scholar
3. Wang, J.-S., and Anderson, P. M. (1991). “Fracture behavior of embrittled F.C.C. metal bicrystals.”Acta metall. mater, 39(5), 779–792.Google Scholar
4. Vehoff, H., Stenzel, H., and Neumann, P. (1987). Metallkade, 78, 550.Google Scholar
5. Wang, J.-S., and Mesarovic, S. D. (1995). “Directional dependence of corrosion fatigue of iron-silicon bicrystals.” Acta metall, mater, 43(10), 3837–3849.Google Scholar
6. Elssner, G., Kom, D., and Rühle, M. (1994). “The influence of interface impurities on fracture energy of UHV diffusion bonded metal-ceramic bicrystals.” Scripta metall. mater, 31(8),1037–1042.Google Scholar
7. Rice, J. R., and Thomson, R. (1974). “Ductile versus brittle behaviour of crystals.” Phil. Mag.,29(1), 73–97.10.1080/14786437408213555Google Scholar
8. Rice, J. R., Suo, Z., and Wang, J.-S. (1990). “Mechanics and thermodynamics of brittle interfacial failure in bimaterial systems.” Acta-Scripta Metallurgica Proceedings Series, Ruhle, M., Evans, A. G., Ashby, M. F., and Hirth, J. P., eds., Pergamon Press, Oxford, 269–294.Google Scholar
9. Beltz, G. E., and Rice, J. R. (1992). “Dislocation nucleation at metal-ceramic interfaces.” Acta metall. mater, 40(Supplement), S321-S331.Google Scholar
10. Beltz, G. E., and Wang, J.-S. (1992). “Crack direction effects along copper/sapphire interfaces.” Acta metall. mater., 40(7), 1675–1683.Google Scholar
11. Kysar, J. W., PhD thesis, Harvard University, 1998.Google Scholar
12. Kysar, J. W. (1999). “Experiments and simulations of directionally dependent fracture along copper/sapphire interfaces.” Materials Research Society Symposium Proceedings, 539, 299–311.10.1557/PROC-539-299Google Scholar
13. Needleman, A. (1987). “A continuum model for void nucleation by inclusion debonding.” J.Appl. Mech., 54, 525–531.Google Scholar
14. Rice, J. R. (1987). “Tensile crack tip fields in elastic-ideally plastic crystals.” Mech. Mater, 6, 317–335.10.1016/0167-6636(87)90030-5Google Scholar
15. Saeedvafa, M. (1992). “Orientation dependence of fracture in copper bicrystals with symmetric tilt boundaries.” Mech. Mater, 13, 295–311.Google Scholar
16. Peralta, P. and Laird, C. (1998). “Fatigue fracture at bicrystal interfaces: Experiment and theory.” Acta mater, 46(6), 2001–2020.Google Scholar
17. Shield, T. and Kim, K.-S. (1994).Google Scholar
18. Neumann, P. (1974). “New experiments concerning the slip processes at propagating fatigue cracks–I.” Acta Metall., 22, 1155–1165.Google Scholar
19. Green, G., and Knott, J. E (1975). “On effects of thickness on ductile crack growth in mild steel.” J. Mech. Phys. Solids, 23, 167–183.Google Scholar
20. Mesarovic, S. D., and Kysar, J. W. (1996). “Continuum aspects of directionally dependent cracking of an interface between copper and alumina crystals.” Mech. Mater, 23, 271–286.10.1016/0167-6636(96)00028-2Google Scholar
21. ABAQUS/Standard User's Manual, (1998). Version 5.7, Hibbit, Karlsson and Sorensen, Inc., Pawtucket, RI, USA.Google Scholar
22. Huang, Y. (1991). “A user-material subroutine incorporating single crystal plasticity in the ABAQUS finite element program.” Mech Report 178, Division of Applied Sciences, Harvard University, Cambridge, Massachusetts.Google Scholar
23. Kysar, J. W. (1997). “Addendum to “A user-material subroutine incorporating single crystal plasticity in the ABAQUS finite element program, Mech Report 178,”.”, Division of Engineering and Applied Sciences, Harvard University, Cambridge, Massachusetts.Google Scholar
24. Peirce, D., Asaro, R. J., and Needleman, A. (1983). “Material rate dependence and localized deformation in crystalline solids.” Acta Metall., 31, 1951.Google Scholar
25. Bassani, J. L., and Wu, T.-Y. (1991). “Latent hardening in single crystals II. Analytical characterization and predictions.” Phil. Trans. R. Soc. Lond. A, 435, 21–41.Google Scholar
26. Xu, X.-P., and Needleman, A. (1993). “Void nucleation by inclusion debonding in crystal matrix.” Modelling Simul. Mater. Sci. Eng., 1, 111–132.10.1088/0965-0393/1/2/001Google Scholar
27. Becker, R. C. (1988). “Interface constitutive relations for use with the finite element code ABAQUS.” Memorandum KZ-002, Alcoa, Pittsburgh, Pennsylvania 15212, USA.Google Scholar
28. Kysar, J. W. (1999c). “Addendum to ‘Interface constitutive relations for use with the finite element code ABAQUS'.” Unpublished.Google Scholar