Hostname: page-component-848d4c4894-r5zm4 Total loading time: 0 Render date: 2024-06-22T13:15:24.001Z Has data issue: false hasContentIssue false
  • English
  • Français

In-Situ Oxygen Monitoring of Rapid Thermal Process Chamber: Diagnosis of Gas Flow Dynamics and Wafer Processing

Published online by Cambridge University Press:  10 February 2011

E. Kondoh  and
K. Maex
E. Kondoh
Affiliation:
IMEC, Kapeldreef 75, 3001 Leuven, Belgium
K. Maex
Affiliation:
IMEC, Kapeldreef 75, 3001 Leuven, Belgium
Get access

Abstract

Two types of real-time oxygen monitoring are investigated for RTP applications, i.e. addressing the basis for a state-of-the-art clean ambient technology and understanding its impact on real processes. Diagnosing of gas flow dynamics in the chamber is carried out by tracer experiments. Deviation from plug flow, which decreases purge efficiency, is found to be a function of gas flow rate. The monitoring of a typical two-step RTP process for silicidation of Ti or Co show that both adsorption and desorption take place. Oxygen is desorbed first at lower temperatures (during temperature ramp) then starts to be adsorbed at higher temperatures. In the case of Ti, a few monolayers of oxygen is adsorbed during the first RTP but less oxygen is adsorbed during the second RTP. The amount of oxygen adsorbed during Co RTP is found to be not as high as during Ti RTP.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 470: Symposium F – Rapid Thermal and Integrated Processing IV , 1997 , 245
Copyright
Copyright © Materials Research Society 1997

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Iyer, S.S., Ting, C-Y., and Fryer, P.M., J. Electrochem. Soc. 132, 2240 (1985).Google Scholar
2. Wang, Q.F., Lauwers, A., Jonckx, F., De Potter, M., Chen, C.-C., and Maex, K., in Suicide Thin Films - Fabrication. Properties, and Application, edited by Tung, R.T., Maex, K., Pellegrin, P.W., Allen, L.H. (Mater. Res. Soc. Proc. 402, Pittsburg, PA, 1996), p. 221.Google Scholar
3. Carr, P., Trap, F., and Heyns, M., Semiconductor International, 1993 (11), 74.Google Scholar
4. Nényei, Z., Sommer, H., Gelpey, J., and Bauer, A., in Rapid Thermal and Integrated Processing III, edited by Wortman, J.J., Green, M.L., Brueck, S.R.J., and Roozeboom, F. (Mater. Res. Soc. Proc. 342, Pittsburgh, PA, 1994), p. 401.Google Scholar