Hostname: page-component-77c89778f8-vsgnj Total loading time: 0 Render date: 2024-07-19T22:26:10.391Z Has data issue: false hasContentIssue false

Influence of Coarse Second Phase Additions on Mechanical Properties of NiAl

Published online by Cambridge University Press:  01 January 1992

H. Clemens
Affiliation:
Metallwerk Plansee GmbH, A-6600 Reutte, Austria.
I. Rumberg
Affiliation:
Metallwerk Plansee GmbH, A-6600 Reutte, Austria.
P. Schretter
Affiliation:
Metallwerk Plansee GmbH, A-6600 Reutte, Austria.
P. Grahle
Affiliation:
Max-Planck-Institut für Metallforschung, Institut für Werkstoffwissenschaft, Seestraβe 92, D-7000 Stuttgart 1, Germany.
O. Lang
Affiliation:
Max-Planck-Institut für Metallforschung, Institut für Werkstoffwissenschaft, Seestraβe 92, D-7000 Stuttgart 1, Germany.
A. Wanner
Affiliation:
Max-Planck-Institut für Metallforschung, Institut für Werkstoffwissenschaft, Seestraβe 92, D-7000 Stuttgart 1, Germany.
E. Arzt
Affiliation:
Max-Planck-Institut für Metallforschung, Institut für Werkstoffwissenschaft, Seestraβe 92, D-7000 Stuttgart 1, Germany.
Get access

Abstract

NiAl/Nb and NiAl/Cr composite materials were prepared by a powder metallurgical approach. The content of the second phases varied between 5 and 10 weigth percent. The thermodynamic stability of Nb and Cr particles in the NiAl matrix was studied at 1473K (1200°C) by means of SEM, XRD and microhardness measurements. In the case of Nb the formation of a Laves phase (NbNiAl) was observed whereas the Cr particles remained stable but were hardened to a remarkable extent due to in-diffusion of Ni and Al. This paper presents the results of three-point bending tests performed on as-HIPed and annealed material at room temperature and elevated temperatures. The yielding behavior at room temperature and the creep behavior at 1200K (927°C) were investigated by compression tests.

Type
Research Article
Copyright
Copyright © Materials Research Society 1995

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Sherman, M. and Vendula, K., J.Mat.Sci. 21, 1974 (1986).Google Scholar
2. Clemens, H. and Bildstein, H., Z.Metallkd. 83, 6 (1992).Google Scholar
3. Arzt, E., Göhring, E., and Grahle, P., Submitted to Proc. MRS Fall Meeting, Boston, Mass., Nov/Dec. 1992.Google Scholar
4. Sauthoff, G., Z.Metallkd. 81, 855 (1990).Google Scholar