Hostname: page-component-7c8c6479df-hgkh8 Total loading time: 0 Render date: 2024-03-28T22:42:46.626Z Has data issue: false hasContentIssue false

Hard Coatings

Published online by Cambridge University Press:  16 February 2011

S. J. Bull
Affiliation:
Materials Engineering Centre, Harwell Laboratory, U.K.A.E.A., Oxfordshire, OXll ORA, U.K.
D. S. Rickerby
Affiliation:
Rolls Royce plc, Derby, DE2 8BJ, U.K.
Get access

Abstract

Thin ceramic coatings have been used in tribological applications for some time because their high defect densities and small grain size leads to a very hard, wear-resistant surface. However it is not sufficient to look at properties such as hardness in isolation when considering the selection of a coating for a given engineering application as other properties such as residual stress or adhesion may be equally important. In fact it is central to the continued development of advanced coating technologies to understand the inter-relationship between the important properties of the coating/substrate system (residual stress, hardness, adhesion etc.) and coating microstructure particularly as this can be controlled to a certain extent by the choice of deposition technology and processing parameters. By using PVD titanium nitride as an example, this paper reviews the potential for microstructural control using current physical vapour deposition (PVD) processes and shows how the microstructure of the coating is important in dictating its mechanical properties. These properties and others which still need to be measured are discussed and the potential for designing with coatings assessed in the light of current understanding.

Type
Research Article
Copyright
Copyright © Materials Research Society 1990

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

[1] Matthews, A., Surface Engineering, 1 93 (1985).Google Scholar
[2] Hintermann, H.E., J.Vac. Sci. Technol., 2B 816 (1984).Google Scholar
[3] Rickerby, D. S. and Bull, S.J., Surf. Coat. Technol., 39/40 315 (1989).Google Scholar
[4] Rickerby, D.S. and Burnett, P.J., Thin Solid Films, 157 195 (1988).Google Scholar
[5] Mochvan, B.A. and Demchishin, A.V., Fiz. Met. Metalloved., 28 653 (1969).Google Scholar
[6] Thornton, J.A., Ann. Rev. Mat. Sci., 7 239 (1977).Google Scholar
[7] Messier, R., Giri, A.P.., and Roy, R.A., J. Vac. Sci. Technol., A2 500 (1984).Google Scholar
[8] Mattox, D.M. and Kominiak, G.J., J. Vac. Sci. Technol., 9 528 (1972).Google Scholar
[9] Mattox, D.M., J. Vac. Sci. Technol., 10 47 (1973).Google Scholar
[10] Bland, R.D., Kominiak, G.J., and Mattox, D.M., J. Vac. Sci. Technol., 11 671 (1974).Google Scholar
[11] Knoll, R.W., and Bradley, E.R., Thin Solid Films, 117 201 (1984).Google Scholar
[12] Rickerby, D.S., J. Vac. Sci. Technol., A4 2809 (1986).Google Scholar
[13] Rickerby, D.S., Jones, A.M., and Bellamy, B.A., Surf. Coat. Technol., 37 111 (1989).Google Scholar
[14] Burnett, P.J. and Rickerby, D.S., Surface Engineering, 3 195 (1987).Google Scholar
[15] Bull, S.J., Rickerby, D.S., Matthews, A., Leyland, A., and Pace, A.R., Surf. Coat. Technol., 36 503 (1988).Google Scholar
[16] Bull, S.J. and Rickerby, D.S., Surf. Coat. Technol. in press (1990).Google Scholar
[17] Helmersson, U., Sundgren, J.-E., and Greene, J.E., J.Vac. Sci. Technol., 4 500 (1986).Google Scholar
[18] Sproul, W.D., Rudnik, P.J. and Graham, M.E., 39/40 355 (1989).Google Scholar
[19] Rickerby, D.S., Eckold, G., Scott, K.T., and Buckley-Golder, I. M, Thin Solid Films, 154 125 (1987).Google Scholar
[20] Bull, S.J. and Rickerby, D.S., in preparation (Paper presented at 17th Int. Conf. on Metallurgical Coatings, San Diego, California, April 2–6, 1990).Google Scholar
[21] Bull, S.J. and Rickerby, D.S., Brit. Ceram. Trans. J., 88 177 (1989).Google Scholar
[22] Randhawa, H., Surf. Coat. Technol., 33 53 (1987).Google Scholar
[23] Rickerby, D.S., Bull, S.J., Robertson, T. and Hendry, A., Surf. Coat. Technol., 41 63 (1990).Google Scholar
[24] Rickerby, D.S. and Burnett, P.J., Surf. Coat. Technol., 33 191 (1987).Google Scholar
[25] Bull, S.J., Rickerby, D.S., Robertson, T. and Hendry, A., Surf. Coat. Technol., 36 743 (1988).Google Scholar
[26] Burnett, P.J. and Rickerby, D.S., J. Mat. Sci., 23 2429 (1988).Google Scholar
[27] Buckley, D.H., and Miyoshi, K., Wear, 100 333 (1984).Google Scholar
[28] Jamal, T., Nimmigadda, R., and Bunshah, R.F., Thin Solid Films, 73 245 (1980).Google Scholar
[29] Suri, A.K., Nimmigadda, R., and Bunshah, R.F., Thin Solid Films, 64 191 (1979).Google Scholar
[30] Hintermann, H.E., Thin Solid Films, 84 215 (1981).Google Scholar
[31] Halling, J., Thin Solid Films, 108 103 (1983).Google Scholar
[32] Rickerby, D.S., Bull, S.J., Jones, A.M., Cullen, F.L. and Bellamy, B.A., Surf. Coat. Technol., 39/40 397 (1989).Google Scholar
[33] Bull, S.J., Rickerby, D.S., and Jain, A., Surf. Coat. Technol. in press (1990).Google Scholar