Hostname: page-component-848d4c4894-sjtt6 Total loading time: 0 Render date: 2024-06-22T13:11:21.595Z Has data issue: false hasContentIssue false
  • English
  • Français

Growth of Large Crystalline Grain Al Thin Films on Amorphous Substrates

Published online by Cambridge University Press:  26 February 2011

G. Sberveglieri ,
V. Canevari ,
N. Romeo  and
C. Spaggiari
G. Sberveglieri
Affiliation:
GNSM-CISM, Dipartimento di Fisica, Via M.B'Azeglio 85 – 43100 Parma, Italy
V. Canevari
Affiliation:
GNSM-CISM, Dipartimento di Fisica, Via M.B'Azeglio 85 – 43100 Parma, Italy
N. Romeo
Affiliation:
GNSM-CISM, Dipartimento di Fisica, Via M.B'Azeglio 85 – 43100 Parma, Italy
C. Spaggiari
Affiliation:
GNSM-CISM, Dipartimento di Fisica, Via M.B'Azeglio 85 – 43100 Parma, Italy
Get access

Abstract

(111) uniquely oriented large crystalline grain Al thin films have been grown on amorphous substrates such as glass or fused quartz. Al has been evaporated by means of an electron beam in a vacuum of 10-7 mbar which was obtained by a conventional oil diffusion pump in conjunction with a titanium sublimation pump and a series of shields cooled at the liquid nitrogen temperature. By studying the variation of the grain size as a function of the growth temperature, a large increase in the grain size has been found at a substrate temperature 100°C below the Al melting point. This has been interpreted as due to the beginning of the metal surface melting and, as a consequence, to the quasi rheotaxial growth of the metal on itself. When the growth has been carried out at a substrate temperature close to the Al melting point (625°C), the grain size has been found out to increase exponentially as a function of the film thickness with a slope which slows down at a thickness of about 1 pm. (111) oriented columnar grains with a size of 50 – 100 pm, hitherto unreported, have been obtained on glass substrates kept at a maximum temperature of 655 °C. The surface morphology of the Al films has been studied by SEM microscopy while the film structural properties have been studied by an X-ray powder-diffracto-meter and by computer - controlled pole figure goniometer.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 54: Symposium E – Thin Films–Interfaces and Phenomena , 1985 , 675
Copyright
Copyright © Materials Research Society 1986

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1 Romeo, N., Canevari, V., Sberveglieri, G., Tosi, A. and Camanzi, A., Revue Phys. Appl. 16, 11 (1981).Google Scholar
2 Romeo, N., J. Cryst. Growth 52, 692 (1981).Google Scholar
3 Sberveglieri, G., Canevari, V., Romeo, N. and Tosi, A., presented at the 1985 Europe MRS Meeting, Strasbourg, France (unpublished).Google Scholar
4 Sberveglieri, G., Romeo, N., Canevari, V., Tosi, A., Thin Solid Films (unpublished).Google Scholar
5 Curran, J.E., Page, J.S. and Pick, U., Thin Solid Films 97, 259 (1982).Google Scholar
6 Vaidya, S. and Sinha, A.K., Thin Solid Films 75, 253 (1981).Google Scholar
7 Blair, J.C. and Ghate, P.B., Thin Solid Films 72, 449 (1980).Google Scholar
8 Chao, S.S., Gonzales-Hernandez, J., Martin, D. and Tsun, R., Appl. Phys. Lett. 46, 1089 (1985).Google Scholar
9 Lipowsky, R., Phys. Rev. Lett. 49, 1575 (1982).Google Scholar
10 Lipowsky, R. and Speth, W., Phys. Rev. B 28, 3983 (1983).Google Scholar
11 Frenken, J.W.M. and van der Veen, J.F., Phys. Rev. Lett. 54, 134 (1985).Google Scholar