Hostname: page-component-7479d7b7d-wxhwt Total loading time: 0 Render date: 2024-07-10T14:19:31.950Z Has data issue: false hasContentIssue false
  • English
  • Français

From Precursors to Non-Oxide Ceramics: Pyrolytic Mechanisms Studied by NMR

Published online by Cambridge University Press:  10 February 2011

W. M. Sigmund ,
M. Feike ,
H. W. Spiess  and
F. Aldinger
W. M. Sigmund
Affiliation:
University pf Stuttgart, Institute for Nonmetallic Inorganic Materials, 70569 Stuttgart, Germany
M. Feike
Affiliation:
Max-Pylanck-Institute for Polymer Research, 55128 Mainz, Germany
H. W. Spiess
Affiliation:
Max-Pylanck-Institute for Polymer Research, 55128 Mainz, Germany
F. Aldinger
Affiliation:
University pf Stuttgart, Institute for Nonmetallic Inorganic Materials, 70569 Stuttgart, Germany
Get access

Abstract

The pyrolysis of a poly ethylsilazane was studied using a CO2-laser beam heated solid state MAS-NMR probe head. Chemical structures of the intermediate stages could be identified. The analogy of the pyrolysis evolution for the following two different methods could be shown: A) in an inert gas furnace conventionally prepared and B) laser irradiated in the NMR probe head under magic-angle spinning (MAS) conditions. Samples prepared by method A were studied by 29Si MAS-NMR and samples prepared by method B were studied with an appropriate cross polarization time by 29Si CP-MAS-NMR. Both experiments showed the same mechanisms for the pyrolysis as the polymer is transformed into a Si3N4/C ceramic.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 410: Symposium S – Covalent Ceramics III-Science and Technology of Non-Oxides , 1995 , 429
Copyright
Copyright © Materials Research Society 1996

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Bill, J., Aldinger, F., Advanced Materials 7 (9), 775–787 (1995).Google Scholar
2. Rice, R., Ceram. Bull. 62, 889 (1983).Google Scholar
3. Han, H. N., Lindquist, D. A., Haggerty, J. H., Seyferth, D., Chem. Mater. 4, 705–711 (1992).Google Scholar
4. Soraru, G. D., Babonneau, F., Mackenzie, J. D., J. Mat. Sci. 25, 3886–3893, (1990)Google Scholar
5. Seitz, J., Bill, J., Egger, N., Aldinger, F., J. Eur. Cer. Soc., submitted (1995).Google Scholar
6. Sigmund, W. M., Spiess, H. W., Feike, M., Aldinger, F., in preparation.Google Scholar