Hostname: page-component-848d4c4894-mwx4w Total loading time: 0 Render date: 2024-06-25T22:56:46.139Z Has data issue: false hasContentIssue false
  • English
  • Français

Focused Ion Beam Sims for Micromachining Applications

Published online by Cambridge University Press:  26 February 2011

L. R. Harriott  and
M. J. Vasile
L. R. Harriott
Affiliation:
AT&T Bell Laboratories, Murray Hill, New Jersey 07974
M. J. Vasile
Affiliation:
AT&T Bell Laboratories, Murray Hill, New Jersey 07974
Get access

Abstract

A secondary ion mass spectrometry (SIMS) system has been incorporated into the AT&T-BL second generation focused ion beam (FIB) micromachining system. The primary applications are end-point detection and topographical element mapping. End-point detection of Cr micromachining on photomasks was done with raster sizes ranging from 10 μm x 10 μm to 3 μm x 3 μm. SIMS end-points, total ions images, and transmitted light measurements show that the ion-milling can be controlled to stop prior to or after the Cr/glass interface. Mass selected secondary ion images have been obtained for high yield ions such as52Cr+ and27 A1+ on raster fields of 25 μm in time intervals ranging from 20 to 100 sec. Al+ SIMS images of 1 μm lines and spaces from a VLSI test pattern have been obtained.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 101: Symposium B – Laser and Particle-Beam Chemical Processing for Microelectronics , 1987 , 483
Copyright
Copyright © Materials Research Society 1998

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1 Parker, N. W., Robinson, W. P., and Synder, J. M., Proc. SPIE, Int. Soc. Opt. Eng., 632 (1986) 126.Google Scholar
2 Prewett, P. D., Proc. SPIE, Int. Soc. Opt. Eng., 537 (1985) 126.Google Scholar
3 Reuss, R. H., Nuclear Instrum. and Methods Phys. Res., B10–11, pt. 1 (1985) 515.Google Scholar
4 Levi-Setti, R., Wang, Y. L. and Crow, G., Appl. Surf. Sci., 26 (1986) 249, and references therein.Google Scholar
5 Kingham, D. R., Vohralik, P., Fathers, D., Waugh, A. R. and Bayley, A. R., “Applied Materials Characterization” Mater. Res. Soc. Symp. Proc, Vol. 48 (1985), W. Katz, P. Williams Eds., p. 319.Google Scholar
6 Melngailis, J., J. Vac Sci. Technol. B5 (1987) 469.Google Scholar
7 Harriott, L. R., Proc. SPIE, Int. Soc. Opt. Eng., Vol. 773, (1987).Google Scholar
8 Comstock, Inc., Oak Ridge, TNGoogle Scholar