Hostname: page-component-76fb5796d-zzh7m Total loading time: 0 Render date: 2024-04-26T16:05:55.379Z Has data issue: false hasContentIssue false

Fatigue Parameters of Lead Zirconate Titanate Thin Films

Published online by Cambridge University Press:  25 February 2011

In K. Yoo
Affiliation:
Department of Materials Engineering, College of Engineering, Virginia Polytechnic Institute and State University, Blacksburg, VA 24061
Seshu B. Desu
Affiliation:
Department of Materials Engineering, College of Engineering, Virginia Polytechnic Institute and State University, Blacksburg, VA 24061
Get access

Abstract

Temperature and voltage dependence of fatigue parameters were studied for PZT thin film capacitors on the basis of our fatigue model. It was found that the coefficient of dielectric viscosity of PZT and initial internal field difference of PZT capacitors play a key role in determining fatigue rate. Jump distance was calculated from voltage dependence of decay constant, and it turned out to be essentially the same as the lattice parameter. This result indicates that vacancies (oxygen vacancies, mainly) move parallel to the polarization direction during fatigue. Activation energy was calculated from the temperature dependence of the decay constant. It was confirmed that activation energy for domain wall movement determines fatigue rate at various temperatures. This fatigue model can be used to predict the fatigue behavior and can be extended to develop an accelerated test for fatigue.

Type
Research Article
Copyright
Copyright © Materials Research Society 1992

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Taylor, G.W., J. Appl. Phys. 38, pp. 4697, 1967.Google Scholar
2. Jaffe, B. et al, Academic Press, NY, 1971.Google Scholar
3. Zheludev, I.S., Physics of Crystalline Dielectrics, Vol. 2, Plenum, NY.Google Scholar
4. Scott, J.F. et al, J. Appl. Phys. 62(11), pp. 4510, Dec. 1987.Google Scholar
5. Rohrer, G. et al, J. Vac. Sci. Technol. A6(3), pp. 1756, May/Jun 1988.Google Scholar
6. Duiker, H.M.et al, J. Appl. Phys. 68(11), pp. 5783, Dec. 1990.Google Scholar
7. Yoo, I.K. and Desu, S.B., Matl's Sci. and Eng., Submitted.Google Scholar
8. Hench, L.L. and West, J.K., Principles of Electronic Ceramics, John Wiley & Sons, 1990.Google Scholar
9. Rudyak, V.M., Izvestiya Akademii Nauk SSSR. Seriya Fizicheskaya, 47(4), pp. 798, 1983.Google Scholar