Hostname: page-component-77c89778f8-gq7q9 Total loading time: 0 Render date: 2024-07-18T13:10:14.418Z Has data issue: false hasContentIssue false

Fabrication of Device-Quality Wide-Gap a-Si:H Films at Very Low Substrate Temperatures

Published online by Cambridge University Press:  25 February 2011

Yoshihiro Hishikawa
Affiliation:
Functional Materials Research Center, SANYO Electric Co., Ltd. 1–18–13, Hashiridani, Hirakata, Osaka 573, Japan
Sadaji Tsuge
Affiliation:
Functional Materials Research Center, SANYO Electric Co., Ltd. 1–18–13, Hashiridani, Hirakata, Osaka 573, Japan
Noboru Nakamura
Affiliation:
Functional Materials Research Center, SANYO Electric Co., Ltd. 1–18–13, Hashiridani, Hirakata, Osaka 573, Japan
Shinya Tsuda
Affiliation:
Functional Materials Research Center, SANYO Electric Co., Ltd. 1–18–13, Hashiridani, Hirakata, Osaka 573, Japan
Shoichi Nakano
Affiliation:
Functional Materials Research Center, SANYO Electric Co., Ltd. 1–18–13, Hashiridani, Hirakata, Osaka 573, Japan
Michitoshi Ohnishi
Affiliation:
Functional Materials Research Center, SANYO Electric Co., Ltd. 1–18–13, Hashiridani, Hirakata, Osaka 573, Japan
Yukinori Kuwano
Affiliation:
Functional Materials Research Center, SANYO Electric Co., Ltd. 1–18–13, Hashiridani, Hirakata, Osaka 573, Japan
Get access

Abstract

Wide-gap a-Si:H films with device quality (Tauc’s optical gap > 1.9eV, σph under AMI.5, 100mW/cm2 illumination ≥ 10−5, Ω−1cm−1, a σpha≥106) have been fabricated. These films are deposited at low substrtate temperatures (TS≤80°C ) either by diluting SiH4 with H2 or optimizing the plasma parameters in a capacitively–coupled RF plasma–CVD reactor. Reduction in the SiH2 bond density and the ESR spin density are also observed. In this study, good film quality is always accompanied by a small deposition rate. Furthermore, σph is nearly the same if the deposition rate and Ts is the same, regardless of other deposition parameters. This suggests that the surface reactions or structural relaxations at the film-growing surface can produce high–quality a–Si:H films even at low TsS, if the deposition rate is low. Results in thermal annealing, light exposure, and solar cell performance confirm that these films have device quality and wide bandgap.

Type
Research Article
Copyright
Copyright © Materials Research Society 1990

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

Matsuda, A. and Tanaka, K., J.Non-Cryst.Solids 97 &98, 1367 (1987)Google Scholar
2. Perrin, J., Solomon, I., Bourdon, B., Fontenille, J. and Liegeon, E., Thin Solid Films 62, 327 (1979)Google Scholar
3. Banerjee, Ratnabali, Das, Debajyoti, Bakabyal, A.K. and Baura, A.K., Jpn.J.Appl.Phys. 28, 1320 (1989)Google Scholar
4. Nevin, W.A., Yamagishi, H., Yamaguchi, M. and Tawada, Y., in Proceedings of the 4th International Photovoltaic Science and Engineering Conference, Sydney, 243 (1989)Google Scholar
5. Parsons, G.N., Tsu, D.V., Wang, C. and Lukovsky, G., J.Vac.Sci. Technol. A7, 1124 (1989)Google Scholar
6. Hishikawa, Y. et al. in Proceedings of the 9th E.C. Photovoltaic Solar Energy Conference, Freiburg, 37 (1989)Google Scholar
7. Fang, C.J., Gruntz, K.J., Ley, L. and Cardona, M., J.Non–Cryst. Solids 35 &36, 255 (1980)Google Scholar
8. Hishikawa, Y., Ohnishi, M. and Kuwano, Y., this volumeGoogle Scholar
9. Gallagher, A., Int.J.Solar Energy 5, 311 (1988)Google Scholar
10. Tsai, C.C., Knights, J.C., Chang, G. and Wacker, B., J. Appl.Phys. 59, 2988 (1986)Google Scholar
11. Ross, R.C. and Jaklik, J. Jr., J.Appl.Phys. 55, 3785 (1984)Google Scholar
12. Nakamura, N. et al. Jpn.J.Appl.Phys. 28, 1762 (1989)Google Scholar