Hostname: page-component-76fb5796d-qxdb6 Total loading time: 0 Render date: 2024-04-26T01:01:27.591Z Has data issue: false hasContentIssue false
  • English
  • Français

Fabrication of Dense Nickel Aluminide Monolithic and Composite Bodies By Combined Self Propagating High Temperature Synthesis and in Situ Containerless Hot Isostatic Pressing

Published online by Cambridge University Press:  26 February 2011

Michael Concannon ,
Edwin S. Hodge ,
Andrew C. Nyce  and
Christopher P. Turmel
Michael Concannon
Affiliation:
Gorham Advanced Materials Institute, Gorham, Maine
Edwin S. Hodge
Affiliation:
Gorham Advanced Materials Institute, Gorham, Maine
Andrew C. Nyce
Affiliation:
Gorham Advanced Materials Institute, Gorham, Maine
Christopher P. Turmel
Affiliation:
Gorham Advanced Materials Institute, Gorham, Maine
Get access

Abstract

Monolithic Ni 3Al and composite Ni3Al/ceramic whisker bodies were fabricated by combined Self Propagating High Temperature Synthesis and in situ containerless Hot Isostatic Pressing (SHS/HIP), starting from cold pressed blends of nickel, aluminum, and boron powders, with and without additions of alumina whiskers. The resultant bodies were dense and had good ductility and mechanical strength at room temperature.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 213: Symposium Q – High-Temperature Ordered Intermetallic Alloys IV , 1990 , 913
Copyright
Copyright © Materials Research Society 1991

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. High Temperature Ordered Intermetallic Alloys, edited by Koch, C. C., Liu, C. T., and Stoloff, N. S. (Mater. Res. Soc. Proc. 39, Pittsburg, PA 1985) passim.Google Scholar
2. High Temperature Ordered Intermetallic Alloys II, edited by Stoloff, N. S., Koch, C. C., Liu, C. T., and Izumi, O. (Mater. Res. Soc. Proc. 81, Pittsburg, PA 1987) passim.Google Scholar
3. High TemDerature Ordered Intermetallic Alloys III, edited by Liu, C. T., Taub, A. I., Stoloff, N. S., and Koch, C. C. (Mater. Res. Soc. Proc. 133, Pittsburg, PA 1989) passim.Google Scholar
4. Meier, G. H., in Oxidation of High-Temterature Intermetallics, edited by Grobstein, T. and Doychak, J. (TMS, Warrendale, PA 1989) pp. 1–16;Google Scholar
4a. Taniguchi, S. and Shibata, T.,Oxidation of High-Temterature Intermetallics , pp. 17–30;Google Scholar
4b. DeVan, J. H. and Hippsley, C. A., Oxidation of High-Temterature Intermetallics, pp. 31–40;Google Scholar
4c. Doychak, J., Smialek, J. L., and Barrett, C. A., Oxidation of High-Temterature Intermetallics, pp. 41–56.Google Scholar
5. Stoloff, N. S., Int. Mater. Revs. 34 (4), 157–183 (1989).Google Scholar
6. Nickel. Iron, and Titanium Aluminides: Market Forecasts for Potential Applications: Business and New Product Opportunities: and a Technoeconomic Assessment of Manufacturing Methods, Volume I, Gorham Advanced Materials Institute, 1990.Google Scholar
7. Bose, A., Moore, B., German, R. M., and Stoloff, N. S., J. Metals 40 (9), 14–17 (1988).Google Scholar