Hostname: page-component-8448b6f56d-mp689 Total loading time: 0 Render date: 2024-04-24T14:19:03.541Z Has data issue: false hasContentIssue false
  • English
  • Français

Experimental Determination of the Strain Transfer Across a Flexible Intermediate Layer in Thin Film Structures as a Function of Flexible Layer Thickness

Published online by Cambridge University Press:  22 February 2011

L. S. Schadler  and
I. C. Noyan
L. S. Schadler
Affiliation:
IBM Research Division, T. J.Watson Research Center, PO Box 218, Yorktown Heights, NY 10598
I. C. Noyan
Affiliation:
IBM Research Division, T. J.Watson Research Center, PO Box 218, Yorktown Heights, NY 10598
Get access

Abstract

The tensile deformation behavior of nickel/ polyimide-thin-film / copper-thin-film structures is observed using an in situ x-ray stress analysis technique. The x-ray stress is measured in the nickel and the copper simultaneously. From the analysis, the stress/strain transfer from the nickel through the polyimide to the copper can be measured.

The effect of polyimide thickness (in the range from no polyimide to 33μm of polyimide) on the stress/strain transfer behavior is reported here.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 239: Symposium D – Thin Films: Stresses and Mechanical Properties III , 1991 , 151
Copyright
Copyright © Materials Research Society 1992

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Geldermans, P., Goldsmith, C, and Bedetii, F., Polyimides edited by Mittal, K. L., (Plenum Press, 1984) p. 695.Google Scholar
2. Lacombe, R. H. and Greenblatt, J., “Polyimides” edited by Mittal, K. L., (Plenum Press, New York, 1984) p. 647.Google Scholar
3. Goldsmith, C., Geldermans, P., Bedetii, F., and Walker, G. A., J. Vac. Sci. Technol. A. 1, 407 (1983).Google Scholar
4. Entenberg, A., Lindberg, V., Fletcher, K., Gatesman, A., and Horwam, R., J. Vac. Sci. Technol. A.1, 3373(1987).CrossRefGoogle Scholar
5. Perry, A. J. and Jagner, M., Thin Solid Films 171, 197 (1989).Google Scholar
6. Chollet, L. and Perry, A.J., Thin Solid Films 123, 223 (1985).Google Scholar
7. Yoshizawa, I., Fukutomi, M., and Kamada, K., J. Nuc. Mater. 128 & 129, 919 (1984).CrossRefGoogle Scholar
8. Iancona, F., Garilli, M., Marietta, G., Puglisi, O., and Pignataro, S., J. Mater. Res. 6, 861 (1991).CrossRefGoogle Scholar
9. Chou, N. J. and Tang, C.H., J. Vac. Sci. Technol. A. 2, 751(1984).Google Scholar
10. Steinmann, P.A., and Hintermann, H.E., J. Vac. Sci. Technol. A. 2 267(1989).Google Scholar
11. Moske, M.A., Lewis, J.E., and Ho, P.S. in Proceedings of the SPE 49th Annual Technical Conference, (1991) p. 1731.Google Scholar
12. Moske, M.A., Ho, P.S., Mikalsen, D.J., Cuomo, J.J., and Rosenberg, R. in Electronic Packaging Materials Science V, edited by Lillie, E., Ho, P.S., Jaccodine, R., and Jackson, K. (Mater. Res. Soc. Proc. 203, Pittsburgh, PA 1990) p. 77.Google Scholar
13. Perry, A.J. and Chollett, L., J. Vac. Sci. Technol. A. 4 (6), 2801 (1986).Google Scholar
14. Korhonen, M.A., Paszkiet, C.A., Black, R.D., and Li, Che-Yu, Scripta Metallurgica 24, 2297 (1990).CrossRefGoogle Scholar
15. Korhonen, M.A., Black, R. D., and Li, Che-Yu, J. Appl. Phys. 69 (3), 1748 (1991).Google Scholar
16. Volkersen, V.O., Luftfahrtforschung 15, 41 (1938).Google Scholar
17. Goland, M. and Reissner, E., J. Appl. Mech. Trans. ASME 11 17 (1944).CrossRefGoogle Scholar
18. Chen, W.T. and Nelson, C.W., IBM J. Res. Develop. 23 (2), 179 (1979).CrossRefGoogle Scholar
19. Engel, P. and Lim, C.K., Mechanical Engineering 108 (10). 46 (1986).Google Scholar
20. Lau, J.H., Rice, D.W. and Harkins, C.G., EEEE Trans, on Components, Hybrids and Manufacturing Technology, 13 (1), 182 (1990).Google Scholar
21. Schadler, L.S. and Noyan, I.C, submitted to J. Mat. Sci. Lett.Google Scholar
22. Sheikh, R. and Noyan, I.C., IBM research Report # 16927Google Scholar
23. Cox, H.L., British J. Applied Phys. 3, 72 (1952).Google Scholar
24. Macherauch, E., Experimental Mechanics, march, 140 (1966).Google Scholar
25. Noyan, I.C. and Cohen, J. B., Residual Stress: Measurement by Diffraction and Interpretation (Springer Verlag, New York, NY, 1987).Google Scholar
26. Schadler, L.S. and Noyan, I.C., submitted Met. Trans. A.Google Scholar
27. Seeshan, K., Lancombe, R.H., and Wagner, J.B. Jr, Materials Research Society Symposium Proceedings, 130. 367(1989).Google Scholar