Hostname: page-component-7c8c6479df-24hb2 Total loading time: 0 Render date: 2024-03-28T18:30:43.223Z Has data issue: false hasContentIssue false

Evolution of Carbon Fiber Microstructure During Carbonization and High-Temperature Graphitization Measured In Situ Using Synchrotron Wide-Angle X-ray Diffraction

Published online by Cambridge University Press:  22 June 2015

Michael Behr
Affiliation:
Core Research and Development, The Dow Chemical Company, Midland, MI 48667
James Rix
Affiliation:
DND-CAT Synchrotron Research Center, Northwestern University, APS/ANL 432-A004, 9700 S. Cass Avenue, Argonne, IL 60439
Brian Landes
Affiliation:
Core Research and Development, The Dow Chemical Company, Midland, MI 48667
Bryan Barton
Affiliation:
Core Research and Development, The Dow Chemical Company, Midland, MI 48667
Eric Hukkanen
Affiliation:
Core Research and Development, The Dow Chemical Company, Midland, MI 48667
Jasson Patton
Affiliation:
Core Research and Development, The Dow Chemical Company, Midland, MI 48667
Steven Weigand
Affiliation:
DND-CAT Synchrotron Research Center, Northwestern University, APS/ANL 432-A004, 9700 S. Cass Avenue, Argonne, IL 60439
Denis Keane
Affiliation:
DND-CAT Synchrotron Research Center, Northwestern University, APS/ANL 432-A004, 9700 S. Cass Avenue, Argonne, IL 60439
Get access

Abstract

This paper will discuss the structure-property model developed that correlates the tensile modulus to the elastic properties and angular distribution of constituent graphitic layers for carbon fiber derived from a polyethylene precursor. In addition, a high-temperature fiber tensile device was built to enable heating of carbon fiber bundles at a variable rate from 25 °C to greater than ∼2300 °C, while simultaneously applying a tensile stress. This capability combined with synchrotron wide-angle x-ray diffraction (WAXD), enabled observation in situ and in real time of the microstructural transformation from different carbon fiber precursors to high-modulus carbon fiber. Experiments conducted using PAN- and PE-derived fiber precursors reveal stark differences in their carbonization and high-temperature graphitization behavior.

Type
Articles
Copyright
Copyright © Materials Research Society 2015 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

Zhao, H., Min, K., and Aluru, N.R., Nano Letters, 9, 30123015 (2009).CrossRefGoogle Scholar
Northolt, M., Veldhuizen, L.H., and Jansen, H., Carbon, 29, 12671279 (1991).CrossRefGoogle Scholar
Fischer, L., and Ruland, W., Colloid and Polymer Science, 258, 917922 (1980).CrossRefGoogle Scholar
Loidl, D., et al. , Carbon., 41, 563570 (2003).CrossRefGoogle Scholar
Hino, T., Kurodo, H., International Patent 4983457 (1991).Google Scholar
Isaac, D.H., Ozbek, S., and Francis, J.G., Materials and Manuf. Processes, 9, 179197 (1994).CrossRefGoogle Scholar
Morgan, P., Carbon fibers and their composites. Taylor & Francis (2005).CrossRefGoogle Scholar
Ruland, W., ACS Polymer Preprints, 9, 13681375 (1968).Google Scholar
Huang, Y., and Young, R.J., Carbon, 33, 97107 (1995).CrossRefGoogle Scholar
Bacon, R., Schalamon, W.A., Journal of Applied Polymer Science, 9 (1969).Google Scholar
Sauder, C., Lamon, J., and Pailler, R., Carbon, 42, 715725 (2004).CrossRefGoogle Scholar
Rudolf, P., Landes, B., Spectroscopy, 9, 2233 (1994).Google Scholar
Torayca® is a registered trademark of Toray Carbon Fibers America, Inc.Google Scholar
Thornel® is a registered trademark of Cytec Industries.Google Scholar