Hostname: page-component-8448b6f56d-mp689 Total loading time: 0 Render date: 2024-04-18T12:07:02.938Z Has data issue: false hasContentIssue false
  • English
  • Français

Effects of additives on the phase stability of Nb3Si intermetallic compound and mechanical properties of Nb-Si alloy

Published online by Cambridge University Press:  18 January 2011

Tatsuichi Tanahashi ,
Seiji Miura  and
Tetsuo Mohri
Tatsuichi Tanahashi
Affiliation:
Division of Materials Science and Engineering, Faculty of Engineering, Hokkaido University, Kita-13, Nishi-8, Kita-ku, Sapporo 060-8628, Hokkaido, Japan Graduate Student, Graduate School of Engineering, Hokkaido University
Seiji Miura
Affiliation:
Division of Materials Science and Engineering, Faculty of Engineering, Hokkaido University, Kita-13, Nishi-8, Kita-ku, Sapporo 060-8628, Hokkaido, Japan
Tetsuo Mohri
Affiliation:
Division of Materials Science and Engineering, Faculty of Engineering, Hokkaido University, Kita-13, Nishi-8, Kita-ku, Sapporo 060-8628, Hokkaido, Japan
Get access

Abstract

Recently, Nb-Si alloys have attracted attentions as substitutional materials of Ni-based superalloys because of its low density and high melting point. For attaining good room temperature toughness of Nb-Si alloys, proposed is a microstructure-control technique by combining eutectic reaction (L->Nb+Nb3Si) and eutectoid reaction (Nb3Si->Nb+ Nb5Si3) for spheroidizing Nb5Si3 strengthening phase embedded in Nb matrix [1]. For the solid solution strengthening of Nb matrix phase W and Mo are very effective, but Nb3Si phase disappears by adding these elements of as small as 3 at%. In contrast, Ti and Ta stabilize Nb3Si phase. For a further alloy development, establishment of an alloy design based on the control of phase stability of Nb3Si is needed. In the previous study [2], it was revealed that the phase stability of Nb3Si can be controlled by selecting appropriate Ta/Mo ratio. In the present study, this approach is expanded to other combinations of stabilizing and destabilizing elements of Nb3Si, such as Ti and W, Ta and W, and Ti and Mo. Vickers hardness tests were conducted on the heat-treated samples to reveal effects of additives on mechanical properties of Nb-Si alloy.

Keywords

microstructureadditivesphase transformation
Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 1295: Symposium N – Intermetallic-Based Alloys for Structural and Functional Applications , 2011 , mrsf10-1295-n05-20
Copyright
Copyright © Materials Research Society 2011

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

[1] Miura, S., Murasato, Y., Sekito, Y., Tsutsumi, Y., Ohkubo, K., Kimura, Y., Mishima, Y. and Mohri, T., Mat. Sci. and Eng. A, Vol. 510-511, 317 (2009).Google Scholar
[2] Miura, S., Tanahashi, T., Mishima, Y. and Mohri, T., Materials Science Forum Vols. 654-656, 444 (2010).Google Scholar
[3] Radhakrishnan, R., Bhanduri, S. and Henager, C.H. Jr., JOM 49(1), 41 (1997).Google Scholar
[4] Jackson, M.R., Bewlay, B.P. and Rowe, R.G., Skelly, D.W., Lipsitt, H.A., JOM 48(1), 39 (1996).Google Scholar
[5] Bewlay, B.P., Jackson, M.R., Zhao, J.-C., and Subramanian, P.R., Metall. Mater. Trans. A, 34A, 2043 (2003).Google Scholar
[6] Miura, S., Aoki, M., Saeki, Y., Ohkubo, K., Mishima, Y. and Mohri, T., Metall. Mater. Trans. A, 36, 489 (2005).Google Scholar
[7] Tan, Y., Tanaka, H., Ma, C.L., Kasama, A., Tanaka, R., Mishima, Y. and Hanada, S., J. Japan Inst. Metals, Vol. 64, 559 (2000).Google Scholar
[8] Ma, C.L., Li, J.G., Tan, Y., Tanaka, R. and Hanada, S., Mat. Sci. and Eng. A 386, 375 (2004).Google Scholar
[9] Sekido, N., Miura, S. and Mishima, Y., “The Third Pacific Rim International Conf. on Advanced Materials and Processing (PRICM 3)” Proceedings, Imam, M. A. et al. , eds.,TMS, Warrendale, PA, 2393 (1998).Google Scholar
[10] Miura, S., Saeki, Y. and Mohri, T., Mat. Res. Soc. Proc. Vol. 552, KK6.9.1 (1999).Google Scholar
[11] Schaeffler, A.L., Met. Prog, 56, 680 (1949).Google Scholar