Hostname: page-component-76fb5796d-x4r87 Total loading time: 0 Render date: 2024-04-27T03:23:03.820Z Has data issue: false hasContentIssue false
  • English
  • Français

The Effect of Sputtering Gas on the Materials and Electrical Characteristics of p-Si Films Formed by DC Magnetron Sputtering

Published online by Cambridge University Press:  17 March 2011

A.T. Voutsas
A.T. Voutsas*
Affiliation:
Sharp Labs of America, LCD Process Technology Department, 5700 NW Pacific Rim Blvd., Camas, WA 98607, avoutsas@sharplabs.com
Get access

Abstract

In this work we will discuss the feasibility of sputtered-Si as a precursor for low-temperature p-Si films. We used DC sputtering to deposit thin Si films (30-100nm) that were subsequently crystallized by excimer-laser annealing using XeCl (308nm) irradiation. The as-deposited films were sputtered with different gases including Ar, He and Ar-He mixtures. As expected, He sputtering led to less dense films that Ar. However, the plasma voltage (during deposition) was also lower in these cases. It was found that mixing of Ar and He gases within an appropriate ratio range produced sputtered films with good optical properties, at much lower plasma voltages that Ar alone. The lower voltage application could be beneficial from the point of view of reducing microarcing and allowing application of higher DC power levels (to improve deposition rate). Polysilicon TFTs fabricated with the optimum Ar-He ratio (>5% Ar in He) demonstrate similar performance between pure-Ar and Ar-He sputtered p-Si TFTs.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 685: Symposium D – Advanced Materials and Devices for Large-Area Electronics , 2001 , D7.3.1
Copyright
Copyright © Materials Research Society 2001

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

[1] Davis, G.A., Weiss, R.E., Aebi, V., Fulks, R.T., Ho, J. and Boyce, J.B., ISSP'99 Proceedings, 234 (1999).Google Scholar
[2] Young, N.D., McCulloch, D.J., Bunn, R.M., French, I.D. and Gale, I.G., Asia Display'98 Workshop Proceedings, 83 (1998).Google Scholar
[3] Gosain, D.P., SPIE Symposium Proceedings, Voutsas, A.T. (Ed.), 4205, 12 (2001).Google Scholar
[4] Carey, P.G., Smith, P.M., Theiss, S.D. and Wickboldt, P., J. Vac. Sc. Technol. A, 17, 1946 (1999)Google Scholar
[5] Carey, P.G., Smith, P.M., Wickbold, P., Thompson, M.O. and Sigmon, T.W., SID Symposium Digest, XXVIII, M36 (1997).Google Scholar
[6] Voutsas, A.T., Marmorstein, A.M. and Solanki, R., Mat. Res. Soc. Symp. Proc., 508, 67 (1998).Google Scholar
[7] Winters, H.F. and Kay, E., J. Appl. Phys., 38, 3928 (1967).Google Scholar
[8] Okamoto, A. and Serikawa, T., J. Electrochem. Soc., 134, 1479 (1987).Google Scholar
[9] Gosain, D.P. and Usui, S., The Electrochem. Soc. Symp. Proc., 98–22, 174 (1998).Google Scholar
[10] Gosain, D.P., Noguchi, T., Machida, A. and Usui, S., AMLCD'99 Proceedings, 239 (1999).Google Scholar