Hostname: page-component-77c89778f8-m8s7h Total loading time: 0 Render date: 2024-07-19T14:12:44.125Z Has data issue: false hasContentIssue false

THE EARLIEST BEAD MANUFACTURE IN THE AMERICAS AT THE PALEO-INDIAN JONES-MILLER SITE, WRAY, COLORADO

Published online by Cambridge University Press:  17 June 2011

Pamela Vandiver
Affiliation:
Department of Materials Science and Engineering, University of Arizona, Tucson, AZ 85721 USA
Amy Vandiver Gruhl
Affiliation:
Scientific Solutions, Nashua, NH USA
Get access

Abstract

Analysis of the composition and microstructure of a Paleo-Indian micro-bead fragment from the Jones-Miller bison-kill site in Wray, Colorado, USE, and dated by radiocarbon testing to 10,200 years ago, showed that fine-motor movements were used to execute a sequence of manufacture on a singular bead. The process involved cleaving a soft, bedded oil shale, diagonally scraping a tubular surface and double-drilling a hole. The last operation caused the bead to fracture, after which it was deposited in a hearth. The raw material consists of bedded clay, silt, opal and quartz particles cemented with carbonaceous material. The presence of similar locally available oil shale with opal inclusions indicates that the raw material was acquired near the Jones-Miller site. Because of high cultural value and small size, only non-destructive analytical techniques were used to characterize the bead, including optical microscopy, UV-VIS, PIXE and XRD. Some 50-micron, previously detached particles were tested by SEM-EDS and compared to local clayey materials, both heat-treated and non-heat-treated, to show that no heat treatment sufficient to cause sintering had occurred. A resource survey in the area around the site and 50 miles to the south produced several comparative materials that were tested by the same methods given above as well as the added methods of DTA and refiring tests.

Type
Research Article
Copyright
Copyright © Materials Research Society 2011

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Stanford, D.J., “Ice Age Hunters,” National Geographic 155 (1979) 114122; and D.J. Stanford, B.D. Smith, D.H. Ubelaker and E.J.F. Szathmary, Handbook of North American Indians, vol. 3, 2006, p. 161.Google Scholar
2. Stanford, D.J., “Preliminary Report of the Excavations of the Jones-Miller Site, Yuma County, CO,” Southwestern Lore 40:3/4 (1974) 29–-36; D.J. Stanford, “The 1975 Excavations at the Jones-Miller Site, Yuma County, CO,” Southwestern Lore 41:4(1975) 34–38; and D.J. Stanford, “The Jones-Miller Site: An Example of Hell Gap Bison Procurement Strategy,” 14 (1978) 90–98. Google Scholar
3. Stanford, D., “Analysis and Interpretation of Hell Gap Hunting Strategies at the Jones-Miller Site,” in Brugal, J.-P et al. , Le Bison: Gibier et Moyen de Subststance des hommes du Paleolithique aux Paleoindiens des Grandes Plaines, Actes de Colloque International Toulouse 1995, Editions APDCA, 1999, pp. 437454.Google Scholar
4. Vandiver, P.B., Soffer, O., Klima, B., Svoboda, J., Science 246 (1989) 1002-1008, and O. Soffer and P. Vandiver, “The Ceramics from Pavlov I – 1957 Excavation”, p. 383–402, and P. Vandiver “Pavlov I Pigments and Their Processing,” pp. 373–382 in B. Klima et al, eds., Pavlov I – Northwest: The Upper Paleolithic Burial and Its Settlement Context, Academy of Sciences of the Czech Republic and Institute of Archaeology in Brno, 1997. Google Scholar
5. Connan, J. and Deschesne, O., “Archaeological Bitumen: Identification, Origins and Uses of an Ancient Near Eastern Material,” in Vandiver, P.., Materials Issues in Art and Archaeology III, MRS Symp. Proc. 267, 1992, pp. 683720.Google Scholar