Hostname: page-component-77c89778f8-m42fx Total loading time: 0 Render date: 2024-07-19T14:54:01.298Z Has data issue: false hasContentIssue false

Ductile Tantalum Oxide Protective Coatings

Published online by Cambridge University Press:  22 February 2011

Hani L. Rizkalla
Affiliation:
Department of Chemical Engineering and Materials Science, University of Minnesota, Minneapolis, Minnesota 55455
Stephen T. Wellinghoff
Affiliation:
Department of Chemical Engineering and Materials Science, University of Minnesota, Minneapolis, Minnesota 55455
Get access

Abstract

Amorphous, anodic Ta2O5 films of 400 A thickness deposited on deformable polymer substrates deformed by microshear banding even at 5–10% tensile strain. Electron beam evaporated Ta2O5 (EBE) were considerably more brittle in tension on the same substrates, fracturing at strains less than 1%. Even though both films were amorphous to electron diffraction the EBE vibrational spectrum in the Ta2O5 region (900 cm-1 - 400 cm-1) was more reminiscent of thermally oxidized material that appears to have greater microstructural order. A significant dynamic mechanical peak was observed at 60–90°C for both Al and Ta foils coated with either anodic or EBE Ta2O5 films. This process was assigned to relaxation of interfacial stresses induced by atomic motion in the oxide in this temperature range. In the face of the rather similar dynamic mechanical spectra we suspect that the presence of a greater Packing heterogeneity might explain the greater brittleness of the EBE films.

Type
Research Article
Copyright
Copyright © Materials Research Society 1985

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Choo, Y. H. and Devereux, O. F., J. Electrochem. Soc., 123 (1976) 1868.Google Scholar
2. Bradhurst, D. H. and Leach, J. S. L., J. Electrochem. Soc., 113 (1966) 1245.Google Scholar
3. Leach, J. S. L. and Neufeld, P., Proc. Brit, Ceram. Soc,, 6 (1966) 49.Google Scholar
4. Leach, J. S. L. and Neufeld, P., Corros. Sci., 9 (1969) 225.CrossRefGoogle Scholar
5. Cochrane, N. J. and Block, R. J., J. Electrochem. Soc., 117 (1970) 225.Google Scholar
6. Mehdizadeh, P. and Block, R. J., J. Electrochem. Soc., 119 (1972) 1091.Google Scholar
7. Edeleanu, C. and Law, T. J., Phil, Mag., 7 (1962) 573.CrossRefGoogle Scholar
8. Grosskreutz, J. C., J. Electrochem. Soc., 116 (1969) 1232.Google Scholar
9. Grosskreutz, J. C., J. Electrochem. Soc., 117 (1970) 940.Google Scholar
10. Bubar, S. F. and Vermilyea, D. A., J. Electrochem. Soc., 11 (1966) 892.Google Scholar
11. Eliezer, D. and Brandon, D. G., Thin Solid Films, 12 (1972) 319.Google Scholar
12. Propp, M. and Young, L., J. Electrochem. Soc., 126 (1979) 524.Google Scholar
13. Young, L., “Anodic Oxide Films” (Academic Press, London, 1961) p. 69.Google Scholar
14. Sethi, V. K. and Gibala, R., Thin Solid Films, 39 (1976) 79.Google Scholar
15. Sethi, V. K. and Gibala, R., Acta Met., 25 (1977) 332.Google Scholar
16. Sethi, V. K. and Gibala, R., Scripta Met., 9 (1975) 527.Google Scholar
17. Sethi, V. K. and Gibala, R., in “Proc. 2nd Int. Conf. on Mechanical Behavior of Materials” (ASM, Cleveland, OH, 1976) p. 73.Google Scholar
18. Rizkalla, H. L. and Wellinghoff, S. T., accepted by J. Materials Science (1984).Google Scholar
19. Lin, Y. C. and Wellinghoff, S. T., submitted to J. Electrochem. Soc. (1984).Google Scholar
20. Eckertova, L., “Physics of Thin Films”, (Plenum Press, New York, 1977).Google Scholar
21. Halloway, P. H. and Nelson, G. C., J. Vac. Sci. Technol., 16, (2) (1979) 793.Google Scholar
22. Cathcart, J. V. (ed) “Stress Effects and the oxidation of Metals”, AIME, New York, 1975).Google Scholar
23. Nakamota, K., “Infra Red and Raman Spectra of Inorganic and Coordination compounds”, (Wiley, New York, 1978).Google Scholar
24. Stephen, N. C. and Roth, R. S., Acta, Cryst., B 27, 1037 (1971).CrossRefGoogle Scholar