Hostname: page-component-77c89778f8-sh8wx Total loading time: 0 Render date: 2024-07-17T15:34:35.049Z Has data issue: false hasContentIssue false
  • English
  • Français

Development of Morphological Instability and Cells During Rapid Solidification of Laser Annealed Silicon Alloys

Published online by Cambridge University Press:  15 February 2011

J. Narayan  and
C. W. White
J. Narayan
Affiliation:
Solid State Division, Oak Ridge National Laboratory, Oak Ridge, TN 37830
C. W. White
Affiliation:
Solid State Division, Oak Ridge National Laboratory, Oak Ridge, TN 37830
Get access

Abstract

The details of morphological instability occurring during rapid solidification have been studied in In+, Ga+, Sb+, Bi+, Ge+, Fe+ and Cr+ implanted silicon specimens after pulsed laser annealing. The average cell sizes were determined at the onset of instability and in the region of well-developed instability using x-section and plan-view electron microscopy. The total and substitutional solute concentration profiles were determined using Rutherford backscattering and channeling techniques. The formation of cells and the critical solute concentrations associated with instability were studied as a function of velocity of solidification, which was varied by controlling the substrate temperature or the laser parameters. The results on the cell formation and the critical solute concentrations were compared with the predictions of the perturbation theory which took into account the dependence of distribution coefficients on the velocity of solidification. A good agreement between the calculations and the experimental results was obtained. We also examined theoretically the effect of reduction in surface tension due to segregation of impurities on cell sizes and critical solute concentrations associated with instability.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 8 , 1981 , 553
Copyright
Copyright © Materials Research Society 1982

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Footnotes

*

Research sponsored by the Division of Materials Sciences, U. S. Department of Energy under contract W-7405-eng-26 with the Union Carbide Corporation.

References

REFERENCES

1.Wang, J. C., Wood, R. F. and Pronko, P. P., Appl. Phys. Lett. 35, 455 (1978).10.1063/1.90377Google Scholar
2.Baeri, P., Campisano, S. U., Foti, G. and Rimini, E., J. Appl. Phys. 50, 788 (1979).10.1063/1.326046Google Scholar
3.Narayan, J., J. Appl. Phys. 52, 1289 (1981);10.1063/1.329753Google Scholar
3aNarayan, J., Naramoto, H. and White, C. W., Appl. Phys. Lett. (in press).Google Scholar
4.Mullins, W. W. and Sekerka, R. F., J. Appl. Phys. 35, 444 (1964).10.1063/1.1713333Google Scholar
5.Narayan, J., Fletcher, J., White, C. W. and Christie, W. H., J. Appl. Phys. (in press).Google Scholar
6.White, C. W., Wilson, S. R., Appleton, B. R. and Young, F. W. Jr., J. Appl. Phys. 51, 738 (1980).10.1063/1.327334Google Scholar