Hostname: page-component-5c6d5d7d68-ckgrl Total loading time: 0 Render date: 2024-08-16T18:32:42.420Z Has data issue: false hasContentIssue false
  • English
  • Français

Development and Characterization of Nanostructure Tin alloys as Anodes in Lithium - Ion Batteries

Published online by Cambridge University Press:  10 February 2011

E. Peled ,
A. Ulus  and
Y. Rosenberga
E. Peled
Affiliation:
School of Chemistry and (a) Wolfson Applied Materials Research Center Tel-Aviv University, Tel Aviv, Israel 69978
A. Ulus
Affiliation:
School of Chemistry and (a) Wolfson Applied Materials Research Center Tel-Aviv University, Tel Aviv, Israel 69978
Y. Rosenberga
Affiliation:
School of Chemistry and (a) Wolfson Applied Materials Research Center Tel-Aviv University, Tel Aviv, Israel 69978
Get access

Abstract

Several tin-antimony and tin-zinc nanostructure alloys were electroplated from an acid bath, on a copper foil, at current densities higher by an order of magnitude than the limiting current density. They have been characterized as potential high-capacity anodes for lithium-ion battery applications. SEM micrographs of the tin-based alloys reveal nanosize particles, which aggregate into larger agglomerates of fractal shapes. On the nanoscale, the zinc-tin alloys have house-of-cards or honeycomb morphology. The composition of one series of tin based alloys was Sn:Sb (atomic ratio) 1.4:1 to 9:1; another alloy consisted of Sn:Sb:Cu in the ratio 34:10:4. All contained about 5% carbon and about 20% oxygen. The zinc-rich tin alloys contain at least 80 atomic percent zinc (their electrochemical characterization will be reported elsewhere). Tin-based alloys with low antimony content, have high reversible capacity (up to 700mAh/g), low irreversible capacity (about 24%), a better rate capability, and a lower average working potential vs. Li. On the other hand, alloys rich in antimony have a longer cycle life, but poor rate capability and a high average working potential vs. Li. The addition of copper to the tin-based alloys improved cycle life and slightly reduced irreversible capacity.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 575: Symposium CC – New Materials for Batteries & Fuel Cells , 1999 , 151
Copyright
Copyright © Materials Research Society 2000

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Idota, Y., Nishima, M., Miyaki, Y., Kubota, T., and Miyasaki, T., Can. Pat. Appl. 2,134,053 (1994).Google Scholar
2. Idota, Y., Matsufuji, A., Maekawa, Y., and Miyasaki, T., Science, 276, 1395(1997).Google Scholar
3. Courtney, I. A. and Dahn, J. R., J. Electrochem. Soc., 144, 2045(1997).Google Scholar
4. Besenhard, O., Yang, J., and Winter, M., J. Power Sources 68, 87(1997).Google Scholar
5. Yang, J., Winter, M., and Besenhard, J. O., Solid State Ionics, 90, 281(1996).Google Scholar
6. Boukamp, B. A., Lesh, G. C., and Huggins, R. A., J. Electrochem. Soc 128, 725(1981).Google Scholar
7. Courtney, A., McKinnon, W. R., and Dahn, J. R., J. Electrochem. Soc., 144, 59(1999).Google Scholar
8. Mao, O., Turner, R. L., Courtney, I. A., Fredericksen, B. D., Buckett, M. I., rause, L. J. K, and Dahn, J. R., Electrochem. Solid-State Lett., 2, 3 (1999).Google Scholar
9. Yang, , Wachtler, , Winter, , Besenhard, , Electrochem. Solid-State Lett., 2,(4) (1999).Google Scholar
10. Peled, E., Ulus, A., The Electrochem. Soc. 194th Boston meeting Proceeding Volume (1998).Google Scholar
11. Ibl, N. in “Advances in Electrochemistry & Electrochemical Engineering, Delahay, P. & Tobias, C.H., Interscience Publishers (1966), Vol. 2, p. 49.Google Scholar
12. Brett, Christopher M.A. & Brett, Ana Maria O., ELECTROCHEMISTRY.Google Scholar
13. Powder diffraction files.Google Scholar
14. Machill, , Shodai, , Sakurai, , Yamaki, , J. Solid-State Electrochem, 3, 97(1999).Google Scholar