Hostname: page-component-7c8c6479df-p566r Total loading time: 0 Render date: 2024-03-29T15:26:34.095Z Has data issue: false hasContentIssue false

Design and implementation of a measurement system for automatically measurement of electrical parameters of thermoelectric generators

Published online by Cambridge University Press:  08 March 2013

Dmitry Petrov
Affiliation:
Department of Sensor Technology, University of Paderborn, 33098 Paderborn, Germany
Fabian Assion
Affiliation:
Department of Sensor Technology, University of Paderborn, 33098 Paderborn, Germany
Ulrich Hilleringmann
Affiliation:
Department of Sensor Technology, University of Paderborn, 33098 Paderborn, Germany
Get access

Abstract

The continues development of thermoelectric generators causes a permanent improvement of their characteristics. New types of thermoelectric generators can work at temperatures up to 1000 K. With this, special measurement equipment is needed to control the electrical parameters of the new developed specimens. The devices must be tested over the whole range of operating temperatures. For each temperature value a series of electrical measurements has to be performed. To establish the maximal output power of the thermoelectric generators, a load resistor with variable resistance has to be connected to the output of thermoelectric generator. The measurement system should measure the electrical current through the load resistor and the voltage over this resistor to determine the device parameters. A large amount of measurement data have to be collected and processed to evaluate the electrical characteristics of the specimen and to present them in graphical form, suitable for the comparison with others specimens.

Type
Articles
Copyright
Copyright © Materials Research Society 2013 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

Energetics, Energy Use, Loss, and Opportunities Analysis: U.S M&M; pp. 17; 2004.Google Scholar
Ahiska, R., Dislitas, S., Microcontroller Based Thermoelectric Generator Application. G.U. J. of Sci. 2006, 19, 131146.Google Scholar
Snyder, G. J., Small Thermoelectric Generators. The Electrochemical Society Interface 2008, 5456.Google Scholar
Assion, F., Schönhoff, M. and Hilleringmann, U., “Titaniumdisilicide as High-Temperature Contact Material for Thermoelectric Generators”, International Conference on Thermoelectrics, Aalborg, Denmark, 9th-12th July, 2012.Google Scholar
Han, H. S., Kim, Y. H., Kim, S. Y., Um, S., J. M.. Hyun, Performance Measurement and Analysis of a Thermoelectric Power Generator. IEEE 2010, 10, 13151325.Google Scholar
http://www.maluska.de/service/hfd2.pdf / Signal relay, HFD2 Maluska Elektronik Google Scholar
http://www.clare.com/home/pdfs.nsf/www/an-145.pdf/$file/an-145.pdf, Advantages of Solid-State Relays Over Electro-Mechanical Relays Application Note AN-145 Google Scholar
Buoni, D., Senatore, A., Sannino, S., Analysis of the Frequency Response of the Mean Value Filter, International Conference on Engineering and Meta-Engineering: ICEME 2010 Google Scholar