Hostname: page-component-848d4c4894-nmvwc Total loading time: 0 Render date: 2024-06-28T23:39:22.874Z Has data issue: false hasContentIssue false
  • English
  • Français

Deposition of Polycrystalline ZnO Films by Two-Step Method and Characterization of Thermal Annealing Effects

Published online by Cambridge University Press:  01 February 2011

Jin-Bock Lee ,
Myung-Ho Lee ,
Hye-Jung Lee  and
Jin-Seok Park
Jin-Bock Lee
Affiliation:
Department of Electrical Engineering, Hanyang University 1271 Sa 1-dong, Ansan, Kyonggi-do 425-791, South Korea
Myung-Ho Lee
Affiliation:
Department of Electrical Engineering, Hanyang University 1271 Sa 1-dong, Ansan, Kyonggi-do 425-791, South Korea
Hye-Jung Lee
Affiliation:
Department of Electrical Engineering, Hanyang University 1271 Sa 1-dong, Ansan, Kyonggi-do 425-791, South Korea
Jin-Seok Park
Affiliation:
Department of Electrical Engineering, Hanyang University 1271 Sa 1-dong, Ansan, Kyonggi-do 425-791, South Korea
Get access

Abstract

Polycrystalline ZnO thin films were deposited on SiO2/Si(100) substrate using RF magnetron sputtering. The film deposition performed in this work was composed of following two procedures; the 1st-deposition for 30 min without oxygen at 100 W and the 2nd-deposition with oxygen in the range O2/(Ar+O2) = 10∼50 %. Deposited ZnO films revealed a strongly c-axis preferred-orientation (the corresponding texture coefficient ∼ 100 %) as well as a high resistivity (> 107 Ωcm). It was also observed that the crystallite size of ZnO was noticeably increased by thermal-annealing.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 720: Symposium H – Materials Issues for Tunable RF and Microwave Devices III , 2002 , H3.13
Copyright
Copyright © Materials Research Society 2002

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Park, S.H., Seo, B.C., and Yoon, G.W., J. Vac. Sci. Technol. A 18(5), 2432 (2000).Google Scholar
2. Yoshino, Y., Makino, T., Katayama, Y., and Hata, T., Vacuum 59, 538 (2000).Google Scholar
3. Wu, M., Shih, W., and Tsai, W., J. Phys. D: Appl. Phys. 31, 943, (1998).Google Scholar
4. Lee, J.B., Lee, H.J., Seo, S.H., and Park, J.S., Thin Solid Films 398-399, 641 (2001)Google Scholar
5. Srivastav, S., Kumar, CVR.V., and Mansingh, A., J. Phys. D: Appl. Phys. 22, 1768 (1989).Google Scholar
6. Lim, W.T., Son, B.K., Kang, D.H., and Lee, C.H., Thin Solid Films 382, 56 (2001).Google Scholar
7. Xu, X.L., Lau, S.P., Chen, J.S., and Tay, B.K., J. Crystal Growth 223, 201 (2001).Google Scholar
8. Exarhos, G.J. and Sharma, S.K., Thin Solid Films 270, 27 (1995).Google Scholar
9. Fujimura, N., Nishihara, T., Goto, S., Xu, J., and Ito, T., J. Crystal Growth 130, 269 (1993).Google Scholar
10. Nanto, H., Minami, T., Shooji, S., and Takata, S., J. Appl. Phys. 55(4), 1029 (1983)Google Scholar
11. Yin, J., Liu, Z.G., Liu, H., Wang, X.S., Zhu, T., and Liu, J.M., J. Crystal Growth 220, 281 (2000).Google Scholar