Hostname: page-component-77c89778f8-gvh9x Total loading time: 0 Render date: 2024-07-17T05:29:52.581Z Has data issue: false hasContentIssue false
  • English
  • Français

Deposition and Characterization of MgO Thin Films on SrTiO3 and LaAlO3 Substrates

Published online by Cambridge University Press:  25 February 2011

Bertha P. Chang ,
Neville Sonnenberg  and
Michael J. Cima
Bertha P. Chang
Affiliation:
Ceramics Processing Research Laboratory, Massachusetts Institute of Technology, Cambridge, MA 02139
Neville Sonnenberg
Affiliation:
Ceramics Processing Research Laboratory, Massachusetts Institute of Technology, Cambridge, MA 02139
Michael J. Cima
Affiliation:
Ceramics Processing Research Laboratory, Massachusetts Institute of Technology, Cambridge, MA 02139
Get access

Abstract

MgO thin films have been deposited on SrTiO3 and LaA1O3 substrates using both off-axis rf magnetron sputtering and electron beam evaporation techniques. The effects of substrate material, temperature, film thickness, deposition rate, sputtering gas, and pressure on the quality of the MgO films produced have been studied. Films deposited on (100) SrTiO3 at temperatures > 300°C display only the (h00) reflections in their X-ray diffraction traces, with narrow X-ray rocking curve measurements indicating that these films are epitaxial. Epitaxy has been confirmed with grazing incidence diffraction. MgO films deposited on (100) LaAlO3 are crystalline, but have varying orientations depending on the film thickness. From scanning electron microscopy, MgO films on SrTiO3 substrates appear smooth and dense while those deposited on LaAlO3 substrates possess rougher surfaces. Surface morphologies have been analyzed using atomic force microscopy.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 280: Symposium B – Evolution of Surface and Thin Film Microstructure , 1992 , 653
Copyright
Copyright © Materials Research Society 1993

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

Aboelfotah, M.O., J. Appl. Phys. 49, 2770 (1978).CrossRefGoogle Scholar
2. Aboelfotah, M.O., Thin Solid Films, 58, 175 (1979).CrossRefGoogle Scholar
3. Thornton, J.A., J. Vac. Sci. Technol. 11, 666 (1974).CrossRefGoogle Scholar
4. Vuoristo, P., Mäntylä, T., and Kettunen, P., J. Vac. Sci. Technol. A4, 2932 (1986).CrossRefGoogle Scholar
5. Vuoristo, P., Mäntylä, T., Kettunen, P., and Lappalainen, R., Vacuum 42, 1001 (1991).CrossRefGoogle Scholar
6. Giess, E.A., Sandstrom, R.J., Gallagher, W.J., Gupta, A., Shinde, S.L., Cook, R.F., Cooper, E.I., O'Sullivan, E.J.M., Roldan, J.M., Segmüller, A.P., Angilello, J., IBM J. Res. Dev., 34, 916 (1990).CrossRefGoogle Scholar