Skip to main content Accessibility help
×
Home

Corrosion Resistant Coatings for High Temperature Applications

  • T. M. Besmann (a1), J. A. Haynes (a1), K. M. Cooley (a1), V. M. Vaubert (a1) and W. Y. Lee (a2)...

Abstract

Efforts to increase efficiency of energy conversion devices have required their operation at ever higher temperatures. This will force the substitution of highertemperature structural ceramics for lower temperature materials, largely metals. Yet, many of these ceramics will require protection from high temperature corrosion caused by combustion gases, atmospheric contaminants, or the operating medium. This paper discusses examples of the initial development of such coatings and materials for potential application in combustion, aluminum smelting, and other harsh environments.

Copyright

References

Hide All
1. Jacobson, N S., J. Am. Ceram. Soc. 76 (1), p. 3 (1993).
2. Pickrell, G. R., Sun, T., Brown, J. J., Fuel Proc. Tech. 44, p. 213 (1995).
3. Fox, D. S., Nitride, J. L. Smialek,” J. Am. Ceram. Soc 73 (2) p. 303 (1990).
4. Richerson, D. W., Modem Ceramic Engineering, Marcel Dekker, New York, 1992, p. 147.
5. Auger, M. L. and Sarin, V. K., Surf. Coat. Tech. 94–95 p. 46 (1997).
6. Lee, K. N. and Miller, R. A., Surf. Coat. Tech. 86–87 p. 142 (1996).
7. Jacobson, N. S. and Lee, K. N., J. Am. Ceram. Soc. 79 [;8] p. 2162 (1996).
8. Hagman, L. O. and Kierkegaard, P., Acta Chem. Scand. 22 p. 1822 (1968).
9. Roy, R., Agrawal, D. K., Alamo, J. and Roy, R.A., Mater. Res. Bul. 19, p. 471 (1984).
10. Li, T. K., Hirschfeld, D. A., VanAken, S., Yang, Y. P. and Brown, J. J., J. Mater. Res. 8, p. 2954 (1993).
11. Li, T. K., Hirschfeld, D. A., and Brown, J. J., J. Mater. Res. 9, p. 2004 (1994).
12. Limaye, S. Y., Agrawal, D. K., and McKinstry, H. A., J. Am. Ceram. Soc. 70, p. C232 (1987).
13. Kang, M., “Alkali/Steam Corrosion Resistance of Commercial SiC Products Coated with Sol-Gel Deposited Mg-Doped AI2TiO5 and Cao.6MgO.4Zr4(PO4)6” Masters Thesis, Virginia Polytechnic Institute and State University, 1994.
14. Lee, W. Y., Cooley, K. M., Berndt, C. C., Joslin, D. L. and Stinton, D. P., J. Am. Cer. Soc. 79 [10], p. 2759 (1996).
15. Lee, W. Y., Stinton, D. P., and Joslin, Debra L., J. Am. Ceram. Soc. 79 [2], p. 484 (1996).
16. Haynes, J. A., Cooley, K. M., Stinton, D. P., Lowden, R. A., Cer. Eng. Sci. Proc., in press.
17. Besmann, T. M., Lee, W. Y., Young, J. P., and Xiao, H., in Covalently Bonded Disordered Thin-Film Materials, edited by M. P. Siegal, J. E. Jaskie, W. Milne, and D. McKenzie (Mater. Res. Soc. Proc. 498, Warrendale, PA 1998).

Related content

Powered by UNSILO

Corrosion Resistant Coatings for High Temperature Applications

  • T. M. Besmann (a1), J. A. Haynes (a1), K. M. Cooley (a1), V. M. Vaubert (a1) and W. Y. Lee (a2)...

Metrics

Full text views

Total number of HTML views: 0
Total number of PDF views: 0 *
Loading metrics...

Abstract views

Total abstract views: 0 *
Loading metrics...

* Views captured on Cambridge Core between <date>. This data will be updated every 24 hours.

Usage data cannot currently be displayed.