Hostname: page-component-76fb5796d-2lccl Total loading time: 0 Render date: 2024-04-26T10:20:56.629Z Has data issue: false hasContentIssue false
  • English
  • Français

Building in Reliability Through a 100x Reduction in Mobile Ions in a 0.8 μm BiCMOS Process

Published online by Cambridge University Press:  15 February 2011

Larry Anderson ,
Suketu Parikh  and
Samuel Nagalingam
Larry Anderson
Affiliation:
Silicon Systems, Inc., 2300 Delaware Avenue, Santa Cruz, Ca 95060 larry.anderson @scz.ssi 1.com; suketu.parikh@scz.ssi 1.com; samuel.nagalingam@scz.ssil.com
Suketu Parikh
Affiliation:
Silicon Systems, Inc., 2300 Delaware Avenue, Santa Cruz, Ca 95060 larry.anderson @scz.ssi 1.com; suketu.parikh@scz.ssi 1.com; samuel.nagalingam@scz.ssil.com
Samuel Nagalingam
Affiliation:
Silicon Systems, Inc., 2300 Delaware Avenue, Santa Cruz, Ca 95060 larry.anderson @scz.ssi 1.com; suketu.parikh@scz.ssi 1.com; samuel.nagalingam@scz.ssil.com
Get access

Abstract

The reduction of mobile ions--mainly Na+, but also K+, H+ and Li+, is very critical as our gate oxide thickness and Leff decreases. Hot electron induced hydrogen compensation of boron doped silicon changes the PMOS Leff and NPN BVebo. This paper shows how to reduce Na+ by 100X, through the use of Triangular Voltage Sweep (TVS). This paper is designed to give scientists and engineers a case history where we reduced these levels from 1012 to 1010 mobile ions/cm2 in our 0.8μm BiCMOS process. This was accomplished by adding Ammonium Fluoride mixture dips at appropriate steps. For fast feedback, we can non-destructively measure Na, K, and H within 10 minutes of completing phororesist removal at any of the metallization steps using TVS. In addition to BiCMOS, TVS measure is a power tool in Nonvolatile Memories for predicting in-line data retention, when data retention is associated with charge gain.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 428: Symposium L – Materials Reliability in Microelectronics VI , 1996 , 373
Copyright
Copyright © Materials Research Society 1996

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Bergemont, Albert, “TVS as a fast and precise detection method to monitor Mobile Charge in oxide (grown oxides, CVD oxides like D 1 BPSG, SOG D2)”, National Semiconductor, private communication, 1994.Google Scholar
2. Kuhn, and Silversmith, , “Ionic contamination and transport of mobile ions in MOS structures,” J. Electrochemical Soc., Vol. 118, pp 966–970.Google Scholar
3. Hillen, M.W. and Verwey, J.F., “Mobile Ions in SiO2 Layers on Si,” Chapter 8 of Instabilities in Silicon Devices Vol.1, edited by Barbottin, G. and Vapaille, A., 1986.Google Scholar
4. Chinn, J., Ho, Y.-S., Chang, M., and Turner, T.E., “Built-In Reliability Through Sodium Elimination,” IRPS Proceedings, 1994, pp 249–251.Google Scholar
5. Chonko, M.A., Khamankar, R., Tiwald, T., Allen, T., and Vasquez, B., “Measurement of Mobile Ion Contamination in Multilayer Metalization by Triangular Voltage Sweep,” IRPS Tutorials, 1994.Google Scholar
6. Nicollian, E.H. and Brews, J.R., MOS Physics and Technology, 1982.Google Scholar
7. Anderson, L.B., Parikh, S., and Nagalingam, S., “A Case Study in a 1OOX Reduction in Sodium Ions in a 0.8 fμm BiCMOS Process using Triangular Voltage Sweep, IEEE Integrated Reliability Workshop, 1995.Google Scholar