Hostname: page-component-76fb5796d-wq484 Total loading time: 0 Render date: 2024-04-27T03:26:25.226Z Has data issue: false hasContentIssue false

Biodegradable Foams for Cell Transplantation

Published online by Cambridge University Press:  15 February 2011

H. Lo
Affiliation:
Departments of Chemical Engineering, The Johns Hopkins University, Baltimore, MD 21218
S. Kadiyala
Affiliation:
Biomedical Engineering, The Johns Hopkins University, Baltimore, MD 21218
S. E. Guggino
Affiliation:
Medicine, The Johns Hopkins University, Baltimore, MD 21218
K. W. Leong
Affiliation:
Biomedical Engineering, The Johns Hopkins University, Baltimore, MD 21218
Get access

Abstract

A processing technique based on the principle of phase separation was developed to fabricate three-dimensional microcellular foams to act as templates for cell transplantation. The polymers used to make the foams were polylactic acid (PLLA) and a polyphosphoester (BPA/PP). The resulting foams had relatively uniform, open cells throughout the matrix. The foams could also be fabricated into complex shapes to meet specific design requirements. The foam morphology and microstructure were characterized by mercury porosimetry and scanning electron microscopy. Osteoblast like cells ROS17/2.8 were successfully cultured in the foams. Cell attachment to the foam interior was verified by confocal microscopy. The fabrication technique allows incorporation of drugs or nutrients into the highly porous structure as demonstrated by the intimate dispersion of fluorescein isothiocyanate (FITC) in the matrix.

Type
Research Article
Copyright
Copyright © Materials Research Society 1994

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

[1] Hoffman, K.M., Stem Cells, 11, 105, 1993 Google Scholar
[2] Ducheyne, P., Acta Orthopaedica Belgica, 51, 144, 1985 Google Scholar
[3] Cahn, J.W. and Hilliard, J.E., J. Chem. Phys., 28, 258,1958 Google Scholar
[4] Siggia, E.D., Phys. Rev., A20, 595, 1979 Google Scholar
[5] Tanaka, H. and Nishi, T., Phys. Rev. Lett., 59, 692,1987 Google Scholar
[6] Kadiyala, S., Guggino, S.E., Michelson, J.D., and Leong, K.W., AIChE annual meeting, extended abstracts, 1991 Google Scholar
[7] Richards, M., Dahiyat, B., Arm, D.M., Lin, S., and Leong, K.W., J. Polym. Sci., A: Polym. Chem., 29, 1157, 1991 Google Scholar
[8] Lo, H., Kadiyala, S., Guggino, S.E., and Leong, K.W.; J. Bio. Mat. Res., submittedGoogle Scholar
[9] Zaks, A. and Klibanov, A.M., Science, 224,1249, 1984; J. Biol. Chem., 263(7), 3194, 1988 Google Scholar