Hostname: page-component-848d4c4894-v5vhk Total loading time: 0 Render date: 2024-06-27T18:37:19.461Z Has data issue: false hasContentIssue false
  • English
  • Français

Back Gate Effects in N-Channel Monocrystalline Silicon Devices-on-Glass and their Suppression by Boron Ion Implantation

Published online by Cambridge University Press:  10 February 2011

Paul Baine ,
S.J.N Mitchell ,
H.S Gamble  and
B.M Armstrong
Paul Baine
Affiliation:
The Northern Ireland Semiconductor Research Centre, The Queen's University of Belfast, Department of Electrical and Electronic Engineering, Northern Ireland
S.J.N Mitchell
Affiliation:
The Northern Ireland Semiconductor Research Centre, The Queen's University of Belfast, Department of Electrical and Electronic Engineering, Northern Ireland
H.S Gamble
Affiliation:
The Northern Ireland Semiconductor Research Centre, The Queen's University of Belfast, Department of Electrical and Electronic Engineering, Northern Ireland
B.M Armstrong
Affiliation:
The Northern Ireland Semiconductor Research Centre, The Queen's University of Belfast, Department of Electrical and Electronic Engineering, Northern Ireland
Get access

Abstract

Initial N-channel self aligned polycrystalline silicon gate transistors fabricated on 1.5μm -2μm single crystal Silicon-O-Glass(SOG) layers exhibited poor transfer characteristics. Measured threshold voltages and On/Off current ratios were in the order of -8V and 10 respectively. This is due to the presence of fixed charge at the bond interface introducing back gate effects which degrade and distort device performance. These back gate effects were suppressed by implantation of boron into the silicon substrate prior to oxidation and bonding, with energy 40keV and dose 7.4×1012cm−2. This resulted in an improvement in device performance with a threshold voltage of-0.54V. On/Off current ratio increased to 1840 and field effect mobility increased from 274cm2/Vs to 357cm2 Vs

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 558: Symposium B – Flat-Panel Displays and Sensors-Principles, Materials… , 1999 , 369
Copyright
Copyright © Materials Research Society 2000

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Minura, A., IEEE Trans. Electron Dev., Vol. 36, No. 2, pp351, 1989 Google Scholar
2. Panwar, O.S., Journal Thin Solid Films, 237, pp255–267, 1994.Google Scholar
3. Spangler, L.J., IEEE Electron Dev. Lett., EDL–8(4) pp 137–139, 1987 Google Scholar
4. Wallis, G., Pomerantz, D.I., J. Appl. Phys., 40, pp39946, 1969 Google Scholar
5. Obermeier, E., Journal Electrochemical Soc., Vol. 95–7, pp212–220 Google Scholar
6. Baine, P.T., Quinn, L.J., Journal of Thin Solid Films, 296, pp 141–144 1997 Google Scholar
7. Feijoo, D., Journal Electrochemical Soc., Vol. 139, No.8, pp 2309–2313, 1992 Google Scholar
8. Hara, T., Journal Electrochemical Soc., Vol. 143, No. 8, pp L166–L168, 1996 Google Scholar