Hostname: page-component-76fb5796d-wq484 Total loading time: 0 Render date: 2024-04-25T13:13:07.896Z Has data issue: false hasContentIssue false
  • English
  • Français

An Emulsion Polymerization Process for Soluble and Electrically Conductive Polyaniline

Published online by Cambridge University Press:  10 February 2011

P. J. Kinlen ,
Y. Ding ,
C. R. Graham ,
J. Liu  and
E. E. Remsen
P. J. Kinlen
Affiliation:
Monsanto Company, St. Louis, Missouri 63167
Y. Ding
Affiliation:
Monsanto Company, St. Louis, Missouri 63167
C. R. Graham
Affiliation:
Monsanto Company, St. Louis, Missouri 63167
J. Liu
Affiliation:
Monsanto Company, St. Louis, Missouri 63167
E. E. Remsen
Affiliation:
Monsanto Company, St. Louis, Missouri 63167
Get access

Abstract

A new emulsion process has been developed for the direct synthesis of the emeraldine salt of polyaniline (PANI) that is soluble in organic solvents. The process entails forming an emulsion composed of water, a water soluble organic solvent (e.g., 2-butoxyethanol), a water insoluble organic acid (e.g., dinonylnaphthalene sulfonic acid) and aniline. Aniline is protonated by the organic acid to form a salt which partitions into the organic phase. As oxidant (ammonium peroxydisulfate) is added, PANI salt forms in the organic phase and remains soluble. As the reaction proceeds, the reaction mixture changes from an emulsion to a two phase system, the soluble PANI remaining in the organic phase. With dinonylnaphthalene sulfonic acid (DNNSA) as the organic acid, the resulting product is truly soluble in organic solvents such as xylene and toluene(not a dispersion), of high molecular weight (Mw >22,000), film forming and miscible with many polymers such as polyurethanes, epoxies and phenoxy resins. As cast, the polyaniline film is only moderately conductive, (10−5 S/cm), however treatment of the film with surfactants such as benzyltriethylammonium chloride (BTEAC) or low molecular weight alcohols and ketones such as methanol and acetone increases the conductivity 2–3 orders of magnitude.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 488: Symposium J – Electrical, Optical & Magnetic Properties of Organic IV , 1997 , 305
Copyright
Copyright © Materials Research Society 1998

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Cao, Y., Andreatta, A., Heeger, A.J. and Smith, P., Polymer, 30, 2305(1989).Google Scholar
2. Annis, B.K., Narten, A.H., MacDiarmid, A.G., and Richter, A.F., Synthetic Metals, 22, 191 (1986).Google Scholar
3. Cao, Y. and Osterholm, J.-E., W094/03528, 1994.Google Scholar
4. Cao, Y. and Osterholm, J.-E., U.S. Patent No. 5, 24,453, 1994.Google Scholar
5. Osterholm, J.-E., Cao, Y., Klavetter, F. and Smith, P., Synth. Met., 55, 1034 (1993).Google Scholar
6. Osterholm, J.-E., et al., Polymer, 35, 2902 (1994).Google Scholar
7. Wei, Y., Hsueh, K.F., and Jang, G-W., Macromolecules 27, 518 (1994).Google Scholar
8. Kuo, C-Y., Provder, T., and Koehler, M. E., J. Liq. Chromatogr., 13, 3177 (1990).Google Scholar
9. Manohar, S.K., MacDiarmid, A.G., and Epstein, A.J., Synth. Met., 41, 711 (1991).Google Scholar
10. Wei, Y., Hsueh, K.F. and Jang, G., Polymer, 35, 3572 (1994).Google Scholar
11. Wei, Y., Hsueh, K.F. and Jang, G., Polymer Preprints, 35, 267 (1994).Google Scholar
12. Billmeyer, F.W., Textbook of Polymer Science, Third Ed., John Wiley and Sons, New York, 1984, p. 211.Google Scholar
13. Grulke, E.A., Polymer Handbook, 3d Ed., Brandrup and Immergut, Eds., Wiley & Sons, New York, pp. 519–517, 1989.Google Scholar
14. Min, Y., Xia, Y, MacDiarmid, A. G. and Epstein, A.J., Synth. Met., 69, 159 (1995).Google Scholar
15. Liu, J. and Kinlen, P.J., Proceedings 1997 MRS Fall Meeting.Google Scholar
16. Frushour, B.G. and Kinlen, P.J., to be published.Google Scholar