Skip to main content Accessibility help

Advanced Flexible CIGS Solar Cells Enhanced by Broadband Nanostructured Antireflection Coatings

  • Gopal G. Pethuraja (a1) (a2), Roger E. Welser (a1), John W. Zeller (a1), Yash R. Puri (a1), Ashok K. Sood (a1), Harry Efstathiadis (a2), Pradeep Haldar (a2) and Jennifer L. Harvey (a3)...


Flexible copper indium gallium diselenide (CIGS) solar cells on lightweight substrates can deliver high specific powers. Flexible lightweight CIGS solar cells are also primary candidates for building-integrated panels. In all applications, CIGS cells can greatly benefit from the application of broadband and wide-angle AR coating technology. The AR coatings can significantly improve the transmittance of light over the entire CIGS absorption band spectrum. Increased short-circuit current has been observed after integrating AR coated films onto baseline solar panels. NREL’s System Advisor Model (SAM) has predicted up to 14% higher annual power output on AR integrated vertical or building-integrated panels. The combination of lightweight flexible substrates and advanced device designs employing nanostructured optical coatings together have the potential to achieve flexible CIGS modules with enhanced efficiencies and specific power.



Hide All
[1] Repins, I., Contreras, M. A., Egaas, B., DeHart, C., Scharf, J., Perkins, C. L., To, B., and Noufi, R., “19·9%-efficient ZnO/CdS/CuInGaSe2 solar cell with 81·2% fill factor,Prog. Photovoltaics Res. Appl., vol. 16, no. 3, pp. 235239, 2008.
[2] Jackson, P., Hariskos, D., Lotter, E., Paetel, S., Wuerz, R., Menner, R., Wischmann, W., and Powalla, M., “New world record efficiency for Cu(In,Ga)Se2 thin-film solar cells beyond 20%,Prog. Photovoltaics Res. Appl., vol. 19, no. 7, pp. 894897, 2011.
[3] Jackson, P., Hariskos, D., Wuerz, R., Kiowski, O., Bauer, A., Friedlmeier, T. M., and Powalla, M., “Properties of Cu(In,Ga)Se2 solar cells with new record efficiencies up to 21.7%,Phys. status solidi – Rapid Res. Lett., vol. 9, no. 1, pp. 2831, 2015.
[4] “A new world record for solar cell efficiency,” EMPA media release dated, 2013. [Online]. Available: EMPA media release. [Accessed: 17-Jan-2013].
[5] Fobare, D., Haldar, P., Efstathiadis, H., Metacarpa, D., Wax, J., Olenick, J., Olenick, K., and Venkateswaran, V., “Novel application of Yttria Stabilized Zirconia as a substrate for thin film CIGS solar cells,Photovoltaic Specialist Conference (PVSC), 2014 IEEE 40th. pp. 341344, 2014.
[6] Welser, R. E., Pethuraja, G. G., Sood, A. W., Sood, A. K., Haldar, P., and Dhar, N. K., “Flexible, High- Efficiency Solar Cells: Approaches and Advanced Design Concepts,” Proceedings of SPIE, vol. 8278, no. 87280J, 2013.
[7] Welser, R. E., Sood, A. W., Pethuraja, G. G., Sood, A. K., Yan, X., Poxson, D. J., Cho, J., Fred Schubert, E., and Harvey, J. L., “Broadband nanostructured antireflection coating on glass for photovoltaic applications,Photovoltaic Specialists Conference (PVSC), 2012 38th IEEE. pp. 33393342, 2012.
[8] Pethuraja, G. G., Sood, A., Welser, R., Sood, A. K., Efstathiadis, H., Haldar, P., and Harvey, J. L., “Large-area nanostructured self-assembled antireflection coatings for photovoltaic devices,Photovoltaic Specialists Conference (PVSC), 2013 IEEE 39th. pp. 99102, 2013.



Full text views

Total number of HTML views: 0
Total number of PDF views: 0 *
Loading metrics...

Abstract views

Total abstract views: 0 *
Loading metrics...

* Views captured on Cambridge Core between <date>. This data will be updated every 24 hours.

Usage data cannot currently be displayed