Hostname: page-component-7479d7b7d-rvbq7 Total loading time: 0 Render date: 2024-07-12T13:19:46.691Z Has data issue: false hasContentIssue false
  • English
  • Français

Y-Ba-Cu-O/PZT Current Controllable Distributed RC-Element

Published online by Cambridge University Press:  15 February 2011

J. Hagberg ,
J. Levoska ,
S. Leppävuori  and
T. Murtoniemi
J. Hagberg
Affiliation:
Microelectronics and Material Physics Laboratories, University of Oulu, FIN-90570 Oulu, Finland
J. Levoska
Affiliation:
Microelectronics and Material Physics Laboratories, University of Oulu, FIN-90570 Oulu, Finland
S. Leppävuori
Affiliation:
Microelectronics and Material Physics Laboratories, University of Oulu, FIN-90570 Oulu, Finland
T. Murtoniemi
Affiliation:
Microelectronics and Material Physics Laboratories, University of Oulu, FIN-90570 Oulu, Finland
Get access

Abstract

A superconducting, current controllable, distributed RC-component was designed and fabricated. The component consisted of YBa2Cu3O7 (YBCO) thin film resistor, which was covered with a dielectric layer and an electrode to form a capacitor. The YBCO thin film was deposited by pulsed laser ablation on a SiTiO3 (100) substrate. It was patterned by photolithography and wet etched to form a tapered strip. This YBCO strip was covered with a lead zirconate titanate layer made by laser ablation and, finally, the dielectric layer was covered with a gold electrode by vacuum evaporation. The electrical characteristics of the superconducting YBCO film and the -element were measured.

Using the constructed component, high-pass and notch filter circuits were demonstrated. It was possible to control the electrical properties of these filters by a dc-current applied through the YBCO strip which causes the superconducting film to be come partly resistive.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 361: Symposium I2 – Ferroelectric Thin Films IV , 1994 , 607
Copyright
Copyright © Materials Research Society 1995

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Newman, N. and Lyons, W.G., Journal of Superconductivity 6, 119 (1993).Google Scholar
2. Lichtenberg, C.L., Meyers, W.J., Kawecki, T.G., Pelzer, A.R., Johnson, M.S., Nisenoff, M. and Price, G.E., Applied Superconductivity 1, 1313 (1993);Google Scholar
Leonard, R.F., Bhasin, K.B., Romanofsky, R.R. and Cubbage, C.D., Applied Superconductivity, 1, 1341 (1993).Google Scholar
3. Levoska, J., Murtoniemi, T. and Leppävuori, S., J. Less-Common Metals 164&165, 710 (1990).Google Scholar
4. Levoska, J., Leppävuori, S., Murtoniemi, T. and Lappalainen, J., in Proc. ELECTRO-CERAMICS IV, 4th International Conference on Electroceramics & Applications, Sept. 5–7, 1994, Aachen, Germany, edited by Waser, R., Hoffmann, S., Bonnenberg, D. and Hoffman, Ch. (Verlag der Augustinus Buchhandlung, Aachen, 1994) pp. 339–342.Google Scholar
5. Kaufman, W.M. and Garrett, S.J., in Active RC Filters: Theory and Application, edited by Huelsman, L.P. (Dowden, Hutchinson & Ross, Inc., Stroudsburg, Pennsylvania, 1976) pp. 243–336.Google Scholar