Hostname: page-component-7479d7b7d-rvbq7 Total loading time: 0 Render date: 2024-07-10T21:52:10.930Z Has data issue: false hasContentIssue false
  • English
  • Français

A Study on Thin Film Microstructure and Its Effects on Acoustic Film Velocity Through Picosecond Ultrasonics Technique

Published online by Cambridge University Press:  01 February 2011

Ta-Ching Li ,
Nen-Wen Pu ,
Ben-Je Lwo ,
Chin-Hsing Kao  and
Long-Jang Hu
Ta-Ching Li
Affiliation:
Chung-Cheng Institute of Technology, National Defense University, Dahshi, Taoyuan 335, Taiwan, ROC.
Nen-Wen Pu
Affiliation:
Chung-Cheng Institute of Technology, National Defense University, Dahshi, Taoyuan 335, Taiwan, ROC.
Ben-Je Lwo
Affiliation:
Chung-Cheng Institute of Technology, National Defense University, Dahshi, Taoyuan 335, Taiwan, ROC.
Chin-Hsing Kao
Affiliation:
Chung-Cheng Institute of Technology, National Defense University, Dahshi, Taoyuan 335, Taiwan, ROC.
Long-Jang Hu
Affiliation:
Chung-Shan Institute of Science and Technology, Longtung, Taoyuan 325, Taiwan, ROC.
Get access

Abstract

In acoustic devices such as film bulk acoustic resonators (FBAR), it is most essential to accurately determine the thin-film sound velocities in situ. In this work, we analyzed the microstructure properties of the zirconia thin films deposited by RF magnetron reactive sputtering with various oxygen partial pressures, and measured the longitudinal film velocity with picosecond ultrasonic technique. The picosecond ultrasonic waves were produced by irradiating the testing samples with an ultrafast laser pulse generated by a self-made mode-locked Ti: Sapphire laser, and detected by a delayed probe laser pulse. The acoustic velocities of the thin films were next determined from the echo times of the ultrasonic waves. To derive more accurate and reliable velocity, three different reflective layers were employed so that the echo shapes and intensities of ultrasonic wave can be compared. It was found in this work that the thin film velocities we measured were less than the bulk value, which can be calculated from Young's modulus and the density. Meanwhile, with the measurement results, it is also found that the measured acoustic velocity and the microstructure of films have strong dependence on the growth conditions. Consequently, accurate thin film velocity will be obtained for an SMR designer through better controlling on deposition conditions during manufacturing process.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 833: Symposium G – Materials, Integration, and Packaging Issues for High-Frequency Devices II , 2004 , G3.11
Copyright
Copyright © Materials Research Society 2005

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. tsarenkov, G. V., IEEE Ultrasonics Symposium, 939–942 (1999).Google Scholar
2. Yim, M., Kim, D.-H., Chai, D., and Yoon, G., J. Vac. Sci. Technol. A 22 (3), 465–471, (2004).Google Scholar
3. Lee, S.-H., Yoon, K. H., Lee, J.-K., J. Appl. Phy. 92, 7, 4062–4069 (2002).Google Scholar
4. Grahn, H. T., Maris, H. J., and Tauc, J., IEEE J. Quantum Electronics, 25, 12 (1989).Google Scholar
5. Profunser, D. M., Vollmann, J., Dual, J., IEEE Ultrasonics Symposium, 995–998 (2002).Google Scholar
6. Grahn, H. T., Maris, H. J., and Tauc, J., Appl. Phys. Lett. 53(23), 5, 2281–2283 (1988).Google Scholar
7. Thomsen, C., Grahn, H. T., Maris, H. J., and Tauc, J., Phys. Rev. B34, 6, 4129–4138 (1986.)Google Scholar
8. Amor, S. B., Rogier, B., Baud, G., Jacquet, M. and Nardin, M., Materials Science and Engineering B57, 28–39 (1998).Google Scholar
9. Russak, M. A., jahnes, C. V., and Katz, E. P., J. Vac. Sci. Technol. A7(3), 1248–1253 (1989).Google Scholar