Hostname: page-component-77c89778f8-rkxrd Total loading time: 0 Render date: 2024-07-18T16:53:17.567Z Has data issue: false hasContentIssue false
  • English
  • Français

Pre-oxidation Silicon Cleaning and its Relation to MOS Reliability and Process-Induced Damage

Published online by Cambridge University Press:  25 February 2011

S. R. Kasi ,
G. W. Rubloff ,
S. A. Cohen  and
L. C. Hsia
S. R. Kasi
Affiliation:
IBM Corporation, 1000 River Road, Essex Junction, Vermont 05452
G. W. Rubloff
Affiliation:
IBM Corporation, P. O. Box 218, Yorktown Heights, NY 10598
S. A. Cohen
Affiliation:
IBM Corporation, P. O. Box 218, Yorktown Heights, NY 10598
L. C. Hsia
Affiliation:
IBM Corporation, East Fishkill M/S 399, Hopewell Junction, NY 12533
Get access

Abstract

Material and device reliability issues play a critical role in the choice of materials and processing options for ULSI technology and manufacturing. Recently, chemical surface treatments (e.g., fluorine incorporation, nitridation) have been shown to benefit MOSFET gate dielectric reliability. This paper describes the impact of different pre-oxidation chemical surface treatments on the reliability characteristics of MOS structures by using a combination of x-ray irradiation and electrical stress-induced charge injection techniques. X-ray irradiation at 1-2 keV increases oxide-trapped charge and the density of interface states substantially (80-800X), but these changes depend significantly on the chemistry of pre-oxidation cleaning. Furthermore, the specific surface treatment strongly affects subsequent device reliability; MOS degradation is up to 5X lower when fluorine-based surface pre-cleaning is used.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 259: Symposium B – Chemical Surface Preparation, Passivation and Cleaning for Semiconductor Growth and Processing , 1992 , 125
Copyright
Copyright © Materials Research Society 1992

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Ma, T. P. and Dressendorfer, P. V., Ionizing Radiation Effects in MOS Devices and Circuits, (Wiley-Interscience Publication, New York, 1989).Google Scholar
2. Nishioka, Y., Ohyu, K., Ohji, Y., Natsuaki, N., Mukai, K., and Ma, T. P., IEEE Electron Device Lett., 10, 141 (1989).Google Scholar
3. Silva, E. F. Da Jr, Nishioka, Y., and Ma, T. P., IEEE Trans. Nucl. Sci., NS–34, 1190 (1987).Google Scholar
4. Nishioka, Y. and Ma, T. P., Appl. Phys. Lett., 53, 1744 (1988).Google Scholar
5. Kasi, S. R., Liehr, M., and Cohen, S., Appl. Phys. Lett.. 58, 2975 (1991).Google Scholar
6. Joshi, A. B. and Kwong, D. L., IEEE Electron Device Lett., 13, 47 (1992).CrossRefGoogle Scholar
7. Lo, G. Q. and Kwong, D. L., IEDM Technical Digest, 1990, 557.Google Scholar
8. Kern, W. W. and Puotinen, D. D. A., RCA Rev., 31, 187 (1970).Google Scholar
9. Kasi, S. R., Liehr, M., and Cohen, S., Appl. Phys. Lett., 57, 2095 (1990).Google Scholar
10.IBM beamline U6, Brookhaven National Laboratory, Long Is., NY.Google Scholar