Hostname: page-component-84b7d79bbc-g78kv Total loading time: 0 Render date: 2024-07-28T10:06:19.476Z Has data issue: false hasContentIssue false
  • English
  • Français

Non-Oxide Additives As Sintering Aids For Si3N4-Based Ceramics

Published online by Cambridge University Press:  25 February 2011

C. Ge ,
Y. Xia  and
L. Chen
C. Ge
Affiliation:
Laboratory of Special Ceramics and Powder Metallurgy, University of Science and Technology Beijing, Beijing 100083, China
Y. Xia
Affiliation:
Laboratory of Special Ceramics and Powder Metallurgy, University of Science and Technology Beijing, Beijing 100083, China
L. Chen
Affiliation:
Laboratory of Special Ceramics and Powder Metallurgy, University of Science and Technology Beijing, Beijing 100083, China
Get access

Abstract

This article is a review of the selected activities since 1979 in using non-oxide additives as sintering aids for silicon nitride. Emphasis was placed on the work done in the authors' laboratory, and it is shown that ZrN and AIN in combined use can result in producing silicon nitride with good properties.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 287: Symposium K – Silicon Nitride Ceramics–Scientific and Technological Advances , 1992 , 399
Copyright
Copyright © Materials Research Society 1993

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Greskovich, C., J. Mater. Sci., 14, 2427 (1979); J. Am. Ceram. Soc., 64, (12) 725 (1981).Google Scholar
2. Uchida, N., Shimada, M. and Koizumi, M., (Proc. Inter. Symposium on Ceramic Components for Engines, Hakone, Japan, 1983) pp. 404–11.Google Scholar
3. Uchida, N., Shimada, M. and Koizumi, M., J. Am. Ceram. Soc., 68, (2) C–38 (1985).Google Scholar
4. Abe, O., Ceram. Int., 16, 53 (1990).Google Scholar
5. Changchun, G. and Yuanluo, X., in Horizons of Powder Metallurgy, Part 2, edited by Kaysser, W. A. and Huppman, W.J. (Verlag Schmid GmbH, Freiburg, 1986), pp. 1163–66.Google Scholar
6. Changchun, G., Yuanluo, X. and Limin, C., in Modeem Developments in Powder Metallurgy, Vol. 21, compiled by Gummeson, U. and Gustafson, D.A. (MPIF & APMI, GmbH, Freiburg, New Jersey, USA, 1988), pp. 619–33.Google Scholar
7. Changchun, G., Yuanluo, X. and Limin, C., Euro-Ceramics, Vol. 1, edited by With, G.de, Terpstra, R.A. and Metselaar, R. (Elsevier Applied Science, London and New York, 1989), pp. 1.426–1.430.Google Scholar
8. Changchun, G., Yuanluo, X., Limin, C. and Yi, Y., edited by Carlsson, R., Johansson, T. and Kahlman, L., (4th Inter. Symposium on Ceramic Materials and Components for Engines, Elsevier Applied Science, London and New York, 1991) pp. 221–28.Google Scholar
9. Weiss, J., Gauckler, L.J., Lukas, H.L., Petzow, G. and Tien, T.Y., J. Mater. Sci., 16, 2997–3005 (1981).Google Scholar
10. Suling, W., J. Inorganic Mater., Shanghai, 3, 199–206 (1987).Google Scholar