Crossref Citations
This article has been cited by the following publications. This list is generated based on data provided by
Crossref.
Banthia, N.
Azzabi, M.
and
Pigeon, M.
1993.
Restrained shrinkage cracking in fibre-reinforced cementitious composites.
Materials and Structures,
Vol. 26,
Issue. 7,
p.
405.
Banthia, Nemkumar
and
Dubeau, Sylvie
1994.
Carbon and Steel Microfiber‐Reinforced Cement‐Based Composites for Thin Repairs.
Journal of Materials in Civil Engineering,
Vol. 6,
Issue. 1,
p.
88.
RAHMAN, Mustafizur
MANSUR, Abul
and
KARIM, Bazlul
2001.
Non-conventional Materials for Machine Tool Structures..
JSME International Journal Series C,
Vol. 44,
Issue. 1,
p.
1.
Dias, Dylmar Penteado
and
Thaumaturgo, Clelio
2005.
Fracture toughness of geopolymeric concretes reinforced with basalt fibers.
Cement and Concrete Composites,
Vol. 27,
Issue. 1,
p.
49.
Lawler, John S.
Zampini, Davide
and
Shah, Surendra P.
2005.
Microfiber and Macrofiber Hybrid Fiber-Reinforced Concrete.
Journal of Materials in Civil Engineering,
Vol. 17,
Issue. 5,
p.
595.
Pons, G.
Mouret, M.
Alcantara, M.
and
Granju, J. L.
2007.
Mechanical behaviour of self-compacting concrete with hybrid fibre reinforcement.
Materials and Structures,
Vol. 40,
Issue. 2,
p.
201.
Hong, Sung-Gul
and
Choi, Kyoung-Kyu
2012.
Crack modeling of steel–carbon hybrid FRCCs.
Advanced Composite Materials,
Vol. 21,
Issue. 4,
p.
283.
Cao, Mingli
Zhang, Cong
and
Wei, Jianqiang
2013.
Microscopic reinforcement for cement based composite materials.
Construction and Building Materials,
Vol. 40,
Issue. ,
p.
14.
Cao, Mingli
Zhang, Cong
Lv, Haifeng
and
Xu, Ling
2014.
Characterization of mechanical behavior and mechanism of calcium carbonate whisker-reinforced cement mortar.
Construction and Building Materials,
Vol. 66,
Issue. ,
p.
89.
Banthia, N.
Majdzadeh, F.
Wu, J.
and
Bindiganavile, V.
2014.
Fiber synergy in Hybrid Fiber Reinforced Concrete (HyFRC) in flexure and direct shear.
Cement and Concrete Composites,
Vol. 48,
Issue. ,
p.
91.
Abou El-Mal, H. S. S.
Sherbini, A. S.
and
Sallam, H. E. M.
2015.
Mode II Fracture Toughness of Hybrid FRCs.
International Journal of Concrete Structures and Materials,
Vol. 9,
Issue. 4,
p.
475.
Hambach, Manuel
Möller, Hendrik
Neumann, Thomas
and
Volkmer, Dirk
2016.
Portland cement paste with aligned carbon fibers exhibiting exceptionally high flexural strength (> 100 MPa).
Cement and Concrete Research,
Vol. 89,
Issue. ,
p.
80.
Kim, Baek-Joong
Yi, Chongku
and
Ahn, Yu-ri
2017.
Effect of embedment length on pullout behavior of amorphous steel fiber in Portland cement composites.
Construction and Building Materials,
Vol. 143,
Issue. ,
p.
83.
Hambach, Manuel
and
Volkmer, Dirk
2017.
Properties of 3D-printed fiber-reinforced Portland cement paste.
Cement and Concrete Composites,
Vol. 79,
Issue. ,
p.
62.
Al-Tikrite, Ahmed
and
Hadi, Muhammad N. S.
2018.
Stress–Strain Relationship of Unconfined RPC Reinforced with Steel Fibers under Compression.
Journal of Materials in Civil Engineering,
Vol. 30,
Issue. 10,
Singh, Niraj Kumar
and
Rai, Baboo
2018.
A Review of Fiber Synergy in Hybrid Fiber Reinforced Concrete.
Journal of Applied Engineering Sciences,
Vol. 8,
Issue. 2,
p.
41.
Feng, Hu
Sheikh, M. Neaz
Hadi, Muhammad N. S.
Feng, Lu
Gao, Danying
and
Zhao, Jun
2019.
Pullout Behaviour of Different Types of Steel Fibres Embedded in Magnesium Phosphate Cementitious Matrix.
International Journal of Concrete Structures and Materials,
Vol. 13,
Issue. 1,
Al-Tikrite, Ahmed
and
Hadi, Muhammad N.S.
2019.
Axial-flexural interaction diagram of RPC columns reinforced with steel fibres.
Structures,
Vol. 19,
Issue. ,
p.
499.
Ghanem, Sahar Y.
and
Bowling, Jonathan
2019.
Mechanical Properties of Carbon-Fiber–Reinforced Concrete.
Advances in Civil Engineering Materials,
Vol. 8,
Issue. 3,
p.
20180089.
Hambach, Manuel
Rutzen, Matthias
and
Volkmer, Dirk
2019.
3D Concrete Printing Technology.
p.
73.