Hostname: page-component-586b7cd67f-2brh9 Total loading time: 0 Render date: 2024-12-05T07:24:42.776Z Has data issue: false hasContentIssue false

High Speed Surface Modification in Fine-Pitch Package Substrate Manufacturing Process with High Density 60 Hz Nonequilibrium Atmospheric Pressure Plasma

Published online by Cambridge University Press:  16 July 2012

Yoshiyuki Iwata
Affiliation:
R&D Operation, IBIDEN Co., Ltd., Gifu-Pref., Japan Department of Electrical Engineering and Computer Science, Nagoya University, Aichi-Pref., Japan
Hajime Sakamoto
Affiliation:
R&D Operation, IBIDEN Co., Ltd., Gifu-Pref., Japan
Keigo Takeda
Affiliation:
Department of Electrical Engineering and Computer Science, Nagoya University, Aichi-Pref., Japan
Masaru Hori
Affiliation:
Department of Electrical Engineering and Computer Science, Nagoya University, Aichi-Pref., Japan
Get access

Abstract

This study examined surface modification of solder resist and dry film resist using 60 Hz nonequilibrium atmospheric pressure plasma with O2/N2 mixing gas. Results show that the plasma discharge condition at O2/N2 mixing ratio of 0.1% was the best for surface modification for both materials, and the surfaces were modified sufficiently at 0.45 m/min package substrate transportation speed. From the plasma diagnostics by Vacuum Ultraviolet Absorption Spectroscopy (VUVAS) and Optical Emission Spectroscopy (OES), it was found that the behaviors of the oxygen radical density and NO-γ emission intensity correlate strongly with surface modification. The extremely high oxygen radical density around 4.7 × 1013 cm-3 was obtained at O2/N2 mixing ratio of 0.1%. The electron density was 2.5 × 1015 cm-3 that is two digits more than that of the conventional atmospheric pressure plasma such as Dielectric Barrier Discharge (DBD). The solder resist surface with the plasma treatment was analyzed by X-ray Photoelectron Spectroscopy (XPS), and it was clarified that material surface was modified by hydrophilic group generation owing polymer chain oxidation with oxygen radical.

Type
Articles
Copyright
Copyright © Materials Research Society 2012

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Haruta, R., J. Jpn Institute of Electronics packaging, Vol. 13, No. 5, pp.327333 (2010)Google Scholar
2. Sawada, Y., J. Plasma and Fusion Res, 79, 1025 (2003)Google Scholar
3. Iwata, Y., Sakamoto, H., Inui, H., and Hori, M.: J. Surf. Finish. Soc. Jpn., 62, 311 (2011).Google Scholar
4. Iwasaki, M., Inui, H., Matsudaira, Y., Kano, H., Yoshida, N., Ito, M., and Hori, M.; Appl. Phys. Lett. 92, 081503 (2008)Google Scholar
5. Hori, M., Kano, H., JP2008010373 (2008)Google Scholar
6. Iwasaki, M., Matsudaira, Y., Takeda, K., Ito, M., Miyamoto, E., Yara, T., Uehara, T. and Hori, M.; J. Appl. Phys. 103, 023303 (2008)Google Scholar
7. Okada, Y., JP2006234995 (2006)Google Scholar
8. Sato, K., Hirakura, H., Ito, T., JP1999240930 (1999)Google Scholar
9. Takashima, S., Hori, M., Goto, T., Kono, A., Ito, M., and Yoneda, K.; Appl. Phys. Lett., 75, 3929 (1999)Google Scholar
10. Hori, M., and Goto, T.; Plasma Sources Sci. Technol. 15, S74 (2006)Google Scholar
11. Koike, S., Sakamoto, T., Kobori, H., Matsuura, H., and Akatsuka, H. ; Jpn. J. Appl. Phys., 43, 5540 (2004)Google Scholar
12. Yuji, T., Suzaki, Y., Yamawaki, T., Sakaue, H. and Akatsuka, H. ; Jpn. J. Appl. Phys., 46, 795 (2007)Google Scholar