Hostname: page-component-848d4c4894-wg55d Total loading time: 0 Render date: 2024-04-30T20:30:31.186Z Has data issue: false hasContentIssue false
  • English
  • Français

Glasses and Optical IR Fibers of As2Se3−xTex

Published online by Cambridge University Press:  25 February 2011

N. Croitoru ,
N. Shamir ,
D. Mendlovic ,
J. Dror  and
Y. Lereah
N. Croitoru
Affiliation:
Department of Electron Devices, Faculty of Engineering, Tel-Aviv University, Ramat-Aviv 69978, Isreal
N. Shamir
Affiliation:
Department of Electron Devices, Faculty of Engineering, Tel-Aviv University, Ramat-Aviv 69978, Isreal
D. Mendlovic
Affiliation:
Department of Electron Devices, Faculty of Engineering, Tel-Aviv University, Ramat-Aviv 69978, Isreal
J. Dror
Affiliation:
Department of Electron Devices, Faculty of Engineering, Tel-Aviv University, Ramat-Aviv 69978, Isreal
Y. Lereah
Affiliation:
Department of Electron Devices, Faculty of Engineering, Tel-Aviv University, Ramat-Aviv 69978, Isreal
Get access

Abstract

Chalcogenide glasses of As2Se3−xTex (O<x<3) were made with special care, using very pure raw materials in order to avoid traces of oxygen. From these materials optical fibers were pulled, and the attenuation of CO2 laser light (wavelength λ = 10.6 μm) transmitted through these fibers was measured as a function of the Te content (x). The fiber's surface and cross-section were examined, using both the scanning electron and optical microscopes, and they directly revealed the increase in the concentration of the defects while x was increasing. The influence of the physical and mechanical properties on the concentration of defects was studied by measuring the optical absorption (α) and the microhardness (VH) of the raw materials. Slabs of As2Se3−xTex were made, and in these samples the α, VH, and glass transition temperature (Tg) as a function of x were measured. In the infrared region of the spectra at λ = 10.6 μm, the α in both the slabs and pulled fibers increased, and the VH and Tg decreased with the increase of x. This can be explained by the increase of the concentration of the defects (small crystallites) which appeared during the fiber pulling.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 88: Symposium P – Optical Fiber Materials and Properties , 1986 , 177
Copyright
Copyright © Materials Research Society 1987

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Miyashita, T. and Nanabe, T., “Infrared Optical Fibers,” IEEE Journ. of Quant. Electron., Vol. QE 18, No. 10, pp. 1432–1450 (1982).CrossRefGoogle Scholar
2. Vasko, A., Lezal, D. and Srb, I., “Oxygen Impurities and Defects in Chalcogenide Glasses,” J. of Noncryst. Solids, Vol.4, pp. 311–321 (1970).Google Scholar
3. Lezal, D. and Srb, I., “Synthesis of Chalogenide Glasses of the Se-Ge and Se-As Systems Without Traces of Oxygen,” Collection Czechoslov. Chem. Comm. Vol.36, pp. 2091–2097 (1971).CrossRefGoogle Scholar
4. Borisova, Z. V., “Glassy Semiconductors,” 51 New York: Plenum Press, pp. 190–197 (1981).CrossRefGoogle Scholar