Hostname: page-component-848d4c4894-4hhp2 Total loading time: 0 Render date: 2024-05-07T00:28:55.177Z Has data issue: false hasContentIssue false
  • English
  • Français

Some Materials Concerns in Nuclear Waste Management

Published online by Cambridge University Press:  29 November 2013

Regina L. Hunter
Get access

Extract

The U.S. Environmental Protection Agency (EPA) has determined that deep geologic disposal is appropriate for three types of radioactive waste generated in the United States: spent fuel, high-level waste, and transuranic waste. Spent fuel is nuclear fuel that has been discharged from a reactor after irradiation. High-level waste (HLW) is the highly radioactive material that remains after the reprocessing of spent fuel to recover uranium or plutonium. Transuranic (TRU) waste is any waste material contaminated with more than 100 nCi/g of elements having atomic numbers greater than 92 and half-lives longer than 20 years. Spent fuel and HLW can result from either commercial or governmental activities, although no commercially generated spent fuel has been reprocessed since 1972. TRU waste results primarily from the design and manufacture of nuclear weapons, not from nuclear power plants.

The physical characteristics of TRU waste differ substantially from those of spent fuel and HLW. This imposes different requirements on materials associated with containment and isolation, so TRU waste will be discussed separately from spent fuel and HLW Because all three are judged to be particularly dangerous to human beings and the environment, the EPA standard requires a demonstration of adequate 10,000-year performance of geologic repositories for these radioactive wastes. The U.S. Department of Energy (DOE) is responsible for implementing the standard by designing, siting, and building the repositories.

This article briefly describes TRU waste, HLW, and spent fuel and the two repositories currently planned by DOE. It con cludes by offering some observations on materials compatibility among waste, container materials, and host rock.

Type
Materials and the Environment
Information
MRS Bulletin , Volume 17 , Issue 3 , March 1992 , pp. 43 - 45
Copyright
Copyright © Materials Research Society 1992

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1.U.S. Environmental Protection Agency, 40 CFR Part 191, Federal Register 50 (1985) p. 38066. 40 CFR 191 Subpart B has been remanded to the EPA by the United States Court of Appeals for the First Circuit (Natural Resources Defense Council v. U.S. Environmental Protection Agency, 824 F.2d 1258 (1st Cir. 1987)).Google Scholar
2.Oak Ridge National Laboratory, Integrated Data Base for 1990: U.S. Spent Fuel and Radioactive Waste Inventories, Projections, and Characteristics, DOE/RW-006, Rev. 6 (U.S. Department of Energy, Washington, DC, 1990).Google Scholar
3.Lynch, R.W., Hunter, R.L., Anderson, D.R., Bingham, F.W., Covan, J.M., Hohnstrieter, G.F., Hunter, T.O., Klett, R.D., Ryder, E.E., Sanders, T.L., and Weart, W.D., Deep Geologic Disposal in the United States: The Waste Isolation Pilot Plant and Yucca Mountain Projects, SAND90-1656 (Sandia National Laboratories, Albuquerque, NM, 1991).Google Scholar
4.U.S. Department of Energy, Supplement, Environmental Impact Statement, Waste Isolation Pilot Plant, DOE/EIS-0026-FS (U.S. Department of Energy, Washington, DC, 1990).Google Scholar
5.Lappin, A.R., Gotway, C.A., Molecke, M.A., Hunter, R.L., and Lorusso, E.N., Rationale for Revised Bin-Scale Gas-Generation Tests With Contact-Handled Transuranic Wastes at the Waste Isolation Pilot Plant, SAND90-2481 (Sandia National Laboratories, Albuquerque, NM, 1991).Google Scholar
6.U.S. Department of Energy, WIPP Test Phase Plan: Performance Assessment, DOE/WIPP 89-011 (U.S. Department of Energy, Waste Isolation Pilot Plant, Carlsbad, NM, 1990).Google Scholar
7.Butcher, B.M., Preliminary Evaluation of Potential Engineered Modifications for the Waste Isolation Pilot Plant (WIPP), SAND89-3095 (Sandia National Laboratories, Albuquerque, NM, 1990).CrossRefGoogle Scholar
8.Engineered Alternatives Task Force, Evaluation of the Effectiveness and Feasibility of the Waste Isolation Pilot Plant Engineered Alternatives: Final Report, Volume I, DOE/WIPP91-007 (U.S. Department of Energy, Carlsbad, NM, 1991).Google Scholar
9.U.S. Department of Energy, Environmental Restoration and Waste Management Five-Year Plan: Fiscal Years 1993-1997, DOE/S-0090 (U.S. Department of Energy, Washington, DC, 1991).Google Scholar
10.U.S. Nuclear Regulatory Commission, 10 CFR Part 60, Federal Register 48 (1983) p. 28194.Google Scholar
11.Stahl, D. and Miller, N.E., Long-Term Performance of Materials Used for High-Level Waste Packaging, NUREG/CR-3900, Vol. 1 (U.S. Nuclear Regulatory Commission, Washington, DC, 1984).Google Scholar
12.Review of DOE Waste Package Program, edited by Soo, P., NUREG/CR-2482, Vol. 3 (U.S. Nuclear Regulatory Commission, Washington, DC, 1983).Google Scholar