Hostname: page-component-8448b6f56d-m8qmq Total loading time: 0 Render date: 2024-04-24T18:26:54.552Z Has data issue: false hasContentIssue false
  • English
  • Français

Tensile Properties of a Heat-Resistant Aluminium Alloy Strengthened by T-Al6Mg11Zn11 Intermetallic Phase

Published online by Cambridge University Press:  11 February 2019

Satoshi Nakatsuka ,
Masato Ishihara ,
Naoki Takata ,
Asuka Suzuki  and
Makoto Kobashi
Satoshi Nakatsuka
Affiliation:
Department of Materials Process Engineering, Graduate School of Engineering, Nagoya University, Furo-cho, Chikusa-ku, Nagoya464-8603, Japan
Masato Ishihara
Affiliation:
Department of Materials Process Engineering, Graduate School of Engineering, Nagoya University, Furo-cho, Chikusa-ku, Nagoya464-8603, Japan
Naoki Takata*
Affiliation:
Department of Materials Process Engineering, Graduate School of Engineering, Nagoya University, Furo-cho, Chikusa-ku, Nagoya464-8603, Japan
Asuka Suzuki
Affiliation:
Department of Materials Process Engineering, Graduate School of Engineering, Nagoya University, Furo-cho, Chikusa-ku, Nagoya464-8603, Japan
Makoto Kobashi
Affiliation:
Department of Materials Process Engineering, Graduate School of Engineering, Nagoya University, Furo-cho, Chikusa-ku, Nagoya464-8603, Japan
*
*(Email: takata.naoki@material.nagoya-u.ac.jp)
Get access

Abstract

We have examined tensile properties of a novel heat-resistant aluminium (Al)-based alloy (with a composition of Al-5Mg-3.5Zn (at%)) strengthened by the T-Al6Mg11Zn11 (cubic) intermetallic phase at various temperatures. The tested specimens of the present alloy were solution-treated at 450°C for 24 h and subsequently aged at 200 or 300 oC for 1 h. The granular precipitates of the T phase were dispersed rather homogenously in the grain interior in the specimen aged at 300°C. In the specimen aged at 200°C, numerous fine precipitates with a mean size of ∼20 nm were observed in the α-Al matrix. The specimen pre-aged at 200°C for 1 h exhibited a superior strength to the conventional Al alloys at elevated temperatures ranging from 150 to 200°C (corresponding to service temperatures for compressor impellers in turbochargers).

Keywords

alloyAlmicrostructurestrengthductility
Type
Articles
Information
MRS Advances , Volume 4 , Issue 25-26: Processing and Manufacturing , 2019 , pp. 1485 - 1490
Check for updates
Copyright
Copyright © Materials Research Society 2019 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

Wallace, G., Jackson, A. and Midison, S., SAE Int. J. Mater. Manuf. 3, 405-412 (2010).CrossRefGoogle Scholar
Jackson, A. P., Wallace, G. R. and Midson, S. P., Adv. Mater. Proc. Apr. 19–22 (2010).Google Scholar
ASM Handbook Volume 2, Properties and selection: nonferrous alloys and special purpose materials, ASM International, 1990.Google Scholar
Reed, R.C., The Superalloys Fundamentals and Applications, Cambridge, 2006.10.1017/CBO9780511541285CrossRefGoogle Scholar
Perepezko, J. H., Science 326 1068-1069 (2009) .CrossRefGoogle ScholarPubMed
Takata, N., Okano, T., Suzuki, A. and Kobashi, M., Intermetallics 95, 48-58 (2018).CrossRefGoogle Scholar
Liang, P., Tarfa, T., Robinson, J. A., Wagner, S., Ochin, P., Harmelin, M. G., Seiferta, H. J., Lukasa, H. L. and Aldinger, F., Thermo. Acta 314, 87-110 (1998).CrossRefGoogle Scholar
Bergman, G., Waugh, J.L.T. and Pauling, L., Acta Crystal. 10, 254-259 (1957).CrossRefGoogle Scholar
Takata, N., Ishihara, M., Suzuki, A. and Kobashi, M., Mater. Sci. Eng. A 739, 62-70 (2019).CrossRefGoogle Scholar
Bigot, A., Auger, P., Chambreland, S. and Blavette, D., Microsc. Microanal. Microstruct. 8 103-113 (1997) .CrossRefGoogle Scholar