Hostname: page-component-848d4c4894-4hhp2 Total loading time: 0 Render date: 2024-05-01T13:51:00.646Z Has data issue: false hasContentIssue false

Hydrothermal Synthesis of Vanadium Pentoxides–Reduced Graphene Oxide Composite Electrodes for Enhanced Electrochemical Energy Storage

Published online by Cambridge University Press:  28 June 2016

S. Gupta*
Affiliation:
Department of Physics and Astronomy and Advanced Materials Institute, Western Kentucky University, Bowling Green, KY 42101, USA
B. Aberg
Affiliation:
Department of Electrical Engineering, Western Kentucky University, Bowling Green, KY 42101, USA
S. B. Carrizosa
Affiliation:
Department of Chemistry, Western Kentucky University, Bowling Green, KY 42101, USA
*
*The author to whom correspondence should be made. E-Mail: sanju.gupta@wku.edu.
Get access

Abstract

Graphene-based nanomaterials (graphene nanosheets/graphene nanoribbons) decorated with vanadium pentoxide (V2O5) nanobelts (i.e. GVNBs) were synthesized via one-step low-temperature facile hydrothermal/solvothermal method as high-performance electrochemical composite electrodes. VNBs were formed in the presence of graphene oxide (GO), a mild oxidant, which transforms into reduced GO (rGOHT) assisted in enhancing the electronic conductivity with mechanical strength for GVNBs. From surface sensitive electron microscopy and spectroscopy structural characterization techniques and analyses, rGOHT nanosheets/ nanoribbons appear to be inserted into and coated with the layered crystal structure of VNBs, which further confirmed the enhanced electrical conductivity of VNBs. The electrochemical energy storage capacity of GVNBs is investigated using electrochemistry and the specific capacitance Cs are determined from both the cyclic voltammetry (CV) with scan rate and galvanostatic charge/discharge V-t profiles with varying current density. The GVNBs having rGO-rich composite V1G3 (V2O5/GO = 1:3) showed superior performance followed by V2O5-rich V3G1 (V2O5/GO = 3:1) as compared with V1G1 (V2O5/GO = 1:1) composites besides pure component (rGOHT and V2O5) materials. Moreover, V1G3 and V3G1 composites showed excellent cyclic stability and the capacitance retention of > 80% after 200 cycles. Furthermore, by performing extensive simulations and modeling of electrochemical impedance spectroscopy data, we determined various circuit parameters (charge transfer and solution resistance, double layer and low frequency capacitance). These findings highlight the comparative performance of nanocomposite hybrid electrode materials.

Type
Articles
Copyright
Copyright © Materials Research Society 2016 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

Gupta, S. and Carrizosa, S. B., J. Electron. Materials 44, 4492 (2015).Google Scholar
Gupta, S., vanMeveren, M. and Jasinski, J., Int. J. Electrochem. Sci. 10, 10272 (2015).Google Scholar
Bai, S., Zhang, K., Wang, L., Sun, J., Luo, R., Li, D. and Chen, A., J. Mater. Chem. A 2, 7927 (2014).Google Scholar
Wang, G. Zhang, L. and Zhang, J., Chem. Soc. Rev. 41, 797 (2012).Google Scholar
Geim, A. and Novoselov, K. S., Nat. Mater. 6, 652 (2007).Google Scholar
Raccichini, R., Varzi, A., Passerini, S. and Scrosati, B., Nat. Mater. 14, 271 (2015).CrossRefGoogle Scholar
Lee, M., Balasingham, S.K., Jeong, H.Y., Hong, W. G., Lee, H.-B.-R., Kim, B. H. and Jun, Y., Sci. Rep. 5, 8151 (2015).Google Scholar
Byrappa, K., Yoshimura, M., in Handbook of Hydrothermal Technology, Noyes Publications, New Jersey, USA (2001).Google Scholar
Roy, R., J. Sol. Stat. Chem. 111, s1117 (1994).Google Scholar
Eda, G. and Chowalla, M., Adv. Mater. 22, 2392 (2010).Google Scholar
Avansi, W. Jr, Ribeiro, C., Leite, E.R. and Mastelaro, V.R., Cryst. Growth Des. 9, 3626 (2009).Google Scholar
Xiong, C., Aliev, A.E., Gnade, B. and Balkus, K.J. Jr. ACS Nano 2, 293 (2008).Google Scholar
Lee, E. H., Lewis, M. B., Blau, P. J., and Mansur, L. K., J. Mater. Res. 6, 610 (1991).Google Scholar
Kim, B.H., Hong, W. G., Moon, H. R., Lee, S. M., Kim, J. M., Kang, S., Jun, Y. and Kimet, H. J., Int. J. Hydrogen Energy 37, 14217 (2012).Google Scholar
Zhou, Y., Bao, Q., Tang, L.A.L., Zhong, Y. and Loh, K.P., Chem. Mater. 21, 2950 (2009).Google Scholar
Dreyer, D. R., Park, S., Bielawski, C.W., and Ruoff, R. S., Chem. Soc. Rev. 39, 228 (2010).Google Scholar
Perera, S. D., Liyanage, A. D., Nijem, N., Ferraris, J. P., Chabal, Y. J., Balkus, K. J. Jr. J. Power Sources 230, 130 (2013).CrossRefGoogle Scholar
Hirschon, B., Orazem, M. E., Tribollet, B., Vivier, V., Frateur, I. and Musiani, M., J. Electrochem. Soc. 157, C452C457 (2010).Google Scholar