Hostname: page-component-84b7d79bbc-l82ql Total loading time: 0 Render date: 2024-07-29T22:34:32.172Z Has data issue: false hasContentIssue false

3D Visualization of Maize Stem by MRI Technology

Published online by Cambridge University Press:  02 July 2020

P. C. Cheng
Affiliation:
Dept. Electrical Engineering, University at Buffalo, Buffalo, New York, 14260, USA
J. H. Chen
Affiliation:
Dept. Electrical Engineering, National Taiwan University, Taipei, Taiwan, Rep. of China
S. C. Hwang
Affiliation:
Dept. Electrical Engineering, National Taiwan University, Taipei, Taiwan, Rep. of China
C. K. Sun
Affiliation:
Dept. Electrical Engineering, National Taiwan University, Taipei, Taiwan, Rep. of China
D. B. Walden
Affiliation:
Dept. Plant Sciences, University of Western Ontario, London, Ontario, CanadaN6A 5B7
W. Y. Cheng
Affiliation:
Williamsville East High School, Williamsville, NY, 14051, USA
Get access

Abstract

Recent development in confocal and multi-photon microscopy allows 3D imaging of plant tissue in high resolution. However, other than physical sectioning, macroscopical study of plant organs in 3D remains a difficult task. Among various available technologies for macroscopical imaging (e.g., Xray macro-tomography, optical coherent tomography and MRI), MRI is an ideal choice for its contrasting modality in volumetric imaging of soft tissues. A 3T Biospect MRI system (Brucker, Germany)(FIG 1) equipped with a 6cm inner diameter micro-quadrature coil (FIG 2) for RF transmission and reception of MRI signals was used in this study. Spin echo based RARE sequence was used to obtain T2 weighted images with TR/TE = 3160.5/58.5ms and field-of-view of 1.67cm × 1.67cm (256 × 256 pixels) at a slice thickness of 0.8mm. This corresponds to a voxel size of 65 × 65 × 800μm. Data was obtained within 1/2 hour with number-of-excitations (nex) set at 16. Figure 4 (a-x) shows a series of MRI sections through a stem node (the node below the main ear insertion) from field-grown maize (Zea mays, van Odyssey sweet corn). The stem was fixed in 1:3 EtOH/acetic acid, washed thoroughly in water prior to imaging. Air bubbles trapped in the tissue were removed by vacuuming, to avoid imaging artifact due to low magnetic susceptibility of air. Figure 5 (a-g) shows reconstructed longitudinal sections. Three-dimensional reconstruction (FIG. 3) was performed by using Vaytek VoxBlast™ and AutoQuant’s AutoVisulize 3D™ software. in combination with image segmentation and tracing tools, the MRI technology will greatly enhance our capability in the understanding of vascular architecture and its development in plants.

Type
Electron Tomography: Recent Advances and Applications (Organized by M. Marko)
Copyright
Copyright © Microscopy Society of America 2001

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)